- Multiple models of walk-in powder coating ovens
- Customizable walk-in ovens
- Also provides a powder coating gun, powder coating booth, powder coating machine, and conveyor lines.
- Different varieties of walk-in powder coating ovens
- Also, offer Powder coating Booth, Powder Coating Gun, Powder Coating Oven, & Powder Coating Machine
Inovatec Machinery Providing Best Quality Walk In Powder Coating Ovens For Customers
Inovatec machinery manufactures some of the best walk in powder coating ovens. These ovens are manufactured using very high quality raw materials. Inovatec machinery is known for its powder coating solutions. The solution comprises the powder coating machine, powder coating gun, powder coating oven, powder coating line, and powder coating booth. You can get a customized walk in powder coating ovens also from Inovatec. It will help to improve the workflow and productivity of your powder coating process. The level of customization varies for the different walk in ovens. You can purchase our walk in ovens either directly from us or through our vendors at your location.
The conveyor system provided in these coating ovens makes it possible to hang the parts inside the oven. Multiple parts can be hanged in the different sections of the hanger. In addition, it will allow you to cure different parts at the same time.
The tunnel type curing oven makes use of conveyor lines for the part movement. Here, there won’t be any closing doors. Instead, the oven is provided with air curtains at both ends of the tunnel. It is best suited for the automated powder curing process.
The powder coating gun gives the necessary charge to the powder particles that help the powder to get sticked to the part surface.
The compressed air pushes out the charged particles from the powder coating gun.
You can interchange the nozzles of the powder coating gun to vary the spray patterns.
The powder coating booth helps to give a perfect finish on the part surface.
It provides a contaminant free environment for the powder spraying process.
You can reduce powder wastage by using a powder coating booth.
It is possible with the help of the powder recovery system installed in the booth.
The powder coating machine allows the user to input the necessary powder spraying parameters.
The digital interface in the coating machine allows precise control of parameters.
Thus, any level of finish is possible on the parts with the help of the powder coating machines from Inovatec machinery.
Sand Blasting Machine for Pre-Coating Finishing
The pre-coating process is needed for many parts before the actual powder coating process. When the parts are old, the surface of the parts will have contaminants. The different contaminants include dust, oil, dirt, and water. If you apply the powder coat on such parts directly, then the coating will not stick properly. So, surface preparation is essential for such parts. The sand blasting machine is one of the popular choices of machines for many businesses. We offer high quality sand blasting machines that are capable of running an efficient process. The wet blasting method is commonly used for the surface treatment of the parts. The water ensures that there is no dust generated during the process. The presence of dust in the environment can adversely affect the powder coating procedure.
- Lifetime technical support for the oven
- Replacement parts available
- High quality raw materials for manufacturing
- Strict quality measures adopted for manufacturing process
The customer needs to place the customization request for the oven along with the order. Inovatec will send the pricing quote, including the customizations. The client will have to pay thirty percent of the total amount in advance. We will start the whole manufacturing process only after the successful receipt of this advance amount. So, if you want the oven urgently, make sure to make the advance payment fast. The remaining amount needs to be paid before the shipping of the walk in oven.
Inovatec machinery takes both small as well as large orders of the walk in curing ovens. If your order is small, then Inovatec will ship the walk in oven using the express shipping method. If the order is a bulk one, then Inovatec will opt for the standard shipping procedure.
Inovatec machinery gives one year warranty for walk in powder curing ovens. The customer can get the replacement parts for free during this one year time if any of the parts go bad. There will be no shipping fees for the replacement parts in the warranty period. When the warranty is over, the replacement part will come at a basic price. We will provide the spare parts for the entire lifetime of the oven. If you need any kind of technical help for troubleshooting the walk in oven, you can contact us. We offer complete technical support for the entire lifetime of the oven.
To facilitate the ease of transactions for the customers, Inovatec has provided multiple payment options. The payment modes include PayPal, Western Union, Bank Transfer, and MoneyGram. However, we will not accept any amount paid via credit cards.
There is no shipping restrictions to any country from Inovatec. We have shipped our powder curing ovens to many parts of the world. The customer can either order the walk-in oven directly from us or through our distributors in your area. We will ship the walk-in oven to your place. So you can order our oven with total confidence.
FAQ for Walk In Powder Coating Oven-Frequently Asked Questions
Does your business require a walk-in powder coating oven?
If yes, then this guide is for you.
You will learn about the various advantages of using walk-in ovens from Inovatec machinery.
Inovatec offers multiple types of walk-in powder coating ovens.
Inovatec not only provides walk-in ovens but also provides complete powder coating solutions.
It includes a powder coating machine, powder spray gun, conveyor line, powder coating oven, and powder coating booth.
The high-quality raw materials used in the production of the walk-in oven ensure a high life.
- 1. What Is A Walk In Powder Coating Oven?
- 2. Is It Possible To Customize The Walk In Powder Coating Oven?
- 3. Can You Share The Various Factors That Affects The Life Of The Walk In Powder Curing Oven?
- 4. What Would Be The Maximum Possible Curing Time That Does Not Cause Any Damages To The Powder?
- 5. Gas Vs Electric Walk In Powder Coating Oven – Which Is Best?
- 6. Can You Share The Standard Cleaning Cycle For The Walk In Powder Coating Oven?
- 7. What Are The Different Heating Methods Used By The Walk In Powder Curing Oven?
- 8. What Is The Maximum Service Temperature Of The Powder Coated Part?
- 9. Can You List The Typical Maintenance Activities On The Walk In Powder Curing Oven?
- 10. What Is The Lifespan For The Walk In Powder Curing Oven?
- 11. Can You Share The Various Benefits of Using The Walk In Powder Coating Oven From Inovatec Machinery?
- 12. What Are The Possible Reasons For Cracks In The Powder Coat After The Curing Process?
- 13. Continuous Vs Batch Processing Oven- Which is Good?
- 14. What Is The Curing Time For The Parts Using The Walk In Powder Coating Oven?
- 15. How To Avoid The Orange Peel Effect During The Curing Process?
- 16. What Is The Difference Between Dwell Time & Oven Cycle Time?
- 17. Is There A Way To Prevent The Outgassing Phenomenon During The Curing Process In A Walk In Powder Curing Oven?
- 18. Are There Any Safety Issues With The Walk In Powder Coating Oven From Inovatec Machinery?
- 19. Is There Any Training Needed For The Operators To Use The Walk In Powder Coating Oven?
- 20. Can You Share The Temperature Range For The Walk In Powder Curing Oven?
- 21. Can You Explain The Working Of A Standard Walk In Powder Coating Oven?
- 22. How Does A Walk In Powder Coating Oven Help To Improve The Efficiency Of The Powder Coating Process?
- 23. What Are The Steps Taken By Inovatec Machinery That Ensure The Quality Of The Walk In Powder Coating Oven?
- 24. Can You Share The Costing Details For The Walk In Powder Coating Oven?
- 25. Can You Share The Type Of After Sales Support Given From Inovatec Machinery For The Walk In Powder Coating Oven?
- 26. Can You Share The Different Applications Of The Walk In Powder Coating Oven?
- 27. Is It Possible To Remove The Powder From Cured Workpieces?
- 28. Will The Walk In Powder Coating Oven Temperature Affect My Parts?
- 29. How To Select The Best Walk In Powder Coating Oven?
- 30. How To Check If The Powder Coating Is Cured Or Not??
- 31. What Is The Part Size Supported By The Walk In Powder Coating Oven?
1. What Is A Walk In Powder Coating Oven?
A walk-in powder coating oven is a big oven that can cure powder sprayed large parts.
This type of oven allows the operator to walk into the oven to place parts.
The walk-in ovens are utilized in the final stage of the powder coating process.
You can use these ovens for curing large and heavy parts.
These ovens are also known by other names like a walk-in oven, walk-in powder curing oven, and walk-in coating oven.
Inovatec offers various customizations in the walk-in ovens.
It allows you to customize the ovens according to your needs.
You can get both electric and gas-powered walk-in ovens from Inovatec machinery.
2. Is It Possible To Customize The Walk-In Powder Coating Oven?
The walk-in powder coating ovens from Inovatec machinery can be customized according to your needs.
The customer can give the customization request on the walk-in oven while pacing the order.
The level of customization will be different for a different walk-in oven.
3. Can You Share The Various Factors That Affects The Life Of The Walk In Powder Curing Oven?
The walk-in powder coating oven’s life is influenced by many factors.
The factors are given below.
3.1 Maintenance of the oven
You must do all the maintenance work on the walk-in oven on time.
If you skip or delay any of the maintenance work, then the life of the walk-in oven will come down.
The maintenance work helps to improve the life of the oven.
3.2 Usage of the oven
When you have large parts of the batch, you may want to put the curing oven for continuous use.
If you run the oven for long durations, then the part will get stressed heavily.
It can affect the life of the walk-in oven.
So, go for short-duration curing processes.
3.3 Timely replacement of parts
The parts of the walk-in oven can go bad after a long time.
So, these parts need a replacement.
Never delay any replacement activity.
If you delay it, then the good parts in the machine will suffer.
3.4 Power source stability
The walk-in oven may either use the 110 volts or the 220-volt power supply.
Whatever be the power specifications, you must ensure that the power that you feed to the oven is free from fluctuations.
If the power is not stable, then the electronic parts of the oven will get damaged soon.
So, always provide a stable power source for the oven.
The cleaning of the walk-in curing oven helps to remove the different contaminants from the oven.
It will ensure that the curing happens properly, and it also ensures that the life of the oven components is not affected by the contaminants.
3.6 Load in the oven
You must not put too many parts in the oven.
Only place the recommended number of parts in the oven at a time.
When you overload the oven, then the different parts of the oven will get stressed.
It will reduce the life of the walk-in oven.
4. What Would Be The Maximum Possible Curing Time That Does Not Cause Any Damages To The Powder?
The typical curing time for most of the parts is 20 to 30 minutes.
The curing time of the part is fully dependent on the powder.
It is the powder manufacturer that specifies the curing time.
So, you need to refer to the powder manufacturer’s instructions to know the maximum possible curing time.
The curing time will also depend on the part size.
Large parts may take more time to cure than small parts.
You can extend the time for curing to few more minutes to avoid any under-curing issues.
5. Gas Vs Electric Walk-In Powder Coating Oven – Which Is Best?
The gas and the electric walk-in powder coating ovens from Inovatec machinery are capable of providing high quality powder coats to the parts.
So, you can select from any of these types of ovens.
The choice will actually depend on your process.
There are some factors to consider before making the selection.
These factors are given below.
The cost of the solution is the first factor to consider.
It involves the operational cost and maintenance cost along with the cost of the machine.
So, you need to consider all these costs.
The operational cost will be less for a gas oven when compared to the electric oven since the price of gas is less than the price of an electric.
The maintenance cost is almost the same for both of these ovens.
You can get the electric and gas ovens from Inovatec machinery in different price ranges.
When it comes to heat distribution, gas ovens are known to provide a better heat distribution than electric ovens.
But, the ramp-up time is fast for an electric oven when compared to a gas oven.
Gas ovens do come in very large sizes than electric ovens.
So, when you have large volumes of large size parts, then the gas oven can be a better choice.
6. Can You Share The Standard Cleaning Cycle For The Walk In Powder Coating Oven?
It is essential to clean the walk-in oven properly.
The oven must be perfectly clean before starting the curing process.
The presence of dirt and dust in the oven can contaminate the powder curing process.
The oven needs to be cleaned after the day’s work.
When you are done with the curing of the entire batch of parts, you need to clean the oven.
A deep cleaning using proper chemicals is needed for the oven during the maintenance time.
You can refer to the manual to know the different chemicals that can be used for cleaning the oven.
It will help to ensure that the oven runs efficiently during the curing process.
7. What Are The Different Heating Methods Used By The Walk-In Powder Curing Oven?
Inovatec machinery manufactures different types of walk-in powder curing ovens.
These ovens will either use a direct heating method or an indirect heating method to heat the oven.
7.1 Direct heating method
In this method, the heat is passed directly onto the parts for curing.
The electric oven that uses electricity makes use of this method for curing the parts.
These ovens will have faster ramp-up times since the heat is passed directly.
So, the oven cycle time will be less for this method.
It will help you to cure more metal parts.
The current is passed through a heating pipe for heating the chamber.
7.2 Indirect heating method
In this method, heat is passed indirectly to the parts for curing.
The ovens that use gas and LPG as fuels make use of this technique for curing parts.
The distribution of heat is more uniform in this type of oven.
There will be an airflow system fitted in these walk-in ovens.
They are responsible for the distribution of the heat inside the oven to all the areas.
Here, the oven will take more time to reach the curing temperature.
So, the oven cycle time will be more.
But, the fuel used in these ovens is less expensive.
8. What Is The Maximum Service Temperature Of The Powder Coated Part?
As a golden rule, you must not use these cured parts above 350 degrees Fahrenheit.
So, powder-coated parts are not recommended for use in places where the temperature crosses this value.
It can damage the powder coat on the metal parts.
9. Can You List The Typical Maintenance Activities On The Walk In Powder Curing Oven?
It is essential to ensure that you don’t skip or delay any of the maintenance activities of the walk-in oven.
Only then, the oven will function smoothly without any issues.
All the maintenance required for the specific oven model will be shared in the respective machine manual.
You can do all the maintenance of the walk-in powder curing oven using the standard maintenance toolkit.
You don’t need to take any special training to do the maintenance work.
The common maintenance jobs are listed below.
9.1 Cleaning and Greasing
You need to clean both the inside and outside of the walk-in oven properly.
Otherwise, the oven will produce dust during the powder coating process.
It will affect the powder coat on the parts.
You can apply the grease to all the necessary parts in the right amount.
9.2 Visual inspection of the machine
The walk-in oven needs to be visually inspected during maintenance.
It will help to assess the state of the walk-in oven.
Most of the defects in the oven can be found out during the visual inspection.
9.3 Part replacement
The different components of the walk-in oven can go faulty over time.
These weak parts need to be replaced during maintenance.
You can buy the replacement parts from Inovatec.
If the oven is under warranty, then you get it for free.
Make sure to use the oven only after replacing the faulty part with a new one.
10. What Is The Lifespan For The Walk In Powder Curing Oven?
The walk-in powder coating oven from Inovatec machinery comes with a long lifespan.
It will continue to work for many years without any issues.
The actual lifespan will depend on the usage of the walk-in oven.
If you use it heavily, then the lifespan of the walk-in curing oven will come down.
Proper maintenance can really help to enhance the lifespan of the walk-in powder coating oven.
11. Can You Share The Various Benefits of Using The Walk-In Powder Coating Oven From Inovatec Machinery?
The walk-in powder coating oven from Inovatec machinery comes with many advantages.
These advantages are listed below.
11.1 Choice of power supply
The power standards vary for different countries.
Some countries use 110-volt power, and others use 220-volt power.
Inovatec provides the customer the option to select the power supply for the walk-in oven.
The customer can either select the 110-volt power supply or the 220 volt one.
11.2 Replacement part support
Inovatec machinery offers replacement parts for the walk-in oven.
If it is within the warranty period, then the replacement part is for free.
If it is after the warranty period, then you can get the spare part from us for a standard price.
11.3 Lifetime technical support
Inovatec machinery will provide free lifetime technical support for the walk-in powder coating oven.
You can contact us at any time for any kind of technical troubleshooting.
11.4 Multiple customization options
The walk-in powder coating oven from Inovatec machinery comes with different customization options.
It will help to make the powder coating process easy for you.
The type of customization will be different for the different walk-in ovens from Inovatec machinery.
11.5 Processing time
The processing time is nothing but the oven cycle time.
It includes the curing time and the bring uptime of the oven.
You cannot alter the curing time for the parts.
But, the bring-up time is oven-dependent.
Some of the walk-in ovens from Inovatec machinery support fast bring-up times.
So, if you invest in such an oven, then you can reduce the processing time.
11.6 Ease of maintenance
All the walk-in powder coating ovens from Inovatec machinery are easy to maintain.
There are no complex maintenance instructions.
All the maintenance works can be easily executed with the help of a standard toolkit.
You don’t need any special tools or training to do the maintenance on the walk-in powder coating oven.
The maintenance cost is also less.
11.7 Support for multiple powders
The walk-in powder coating oven from Inovatec supports wide temperature ranges.
So, it is capable of curing almost all types of powders.
You can use most of the coating powders in this oven.
11.8 Eco-friendly solution
There are no toxic by-products produced during the curing process in a walk-in powder coating oven.
It is entirely safe for the environment.
It will not cause any pollution.
Thus, you can run an eco-friendly coating process.
11.9 Cost-effective solution
You need to make a one-time investment for the walk-in powder coating oven.
The walk-in powder coating oven comes with a very long lifespan.
So, you can use it for many years.
The oven will also help in providing a high-quality finish to the parts.
The quality of the coating will be consistent across all the parts.
Certain ovens also allow you to cure multiple parts at the same time.
Thus, it is a cost-effective solution.
12. What Are The Possible Reasons For Cracks In The Powder Coat After The Curing Process?
As a business owner, you won’t be interested to see cracks in the final powder-coated parts.
Such parts will get rejected during the quality checks, and the yield will come down.
The cracks happen on the powder coat due to multiple reasons.
These reasons are given below.
The unstable temperature in the oven is the main reason for the cracks in the coating.
If the oven is unable to maintain a stable curing temperature, then it may result in cracks in the coating.
If you lower the curing time, then cracks can happen in the coating.
Lower curing time means the powder will not flow properly across the part surface.
Sometimes the operator takes the oven cycle time as the curing time.
So, the parts will not be under the curing temperature for the actual curing time, and the under curing will happen.
Non-uniform distribution of powder particles on the part surface can also result in cracks during the curing process.
So, when you powder spray the part, ensure that the spray coat is uniform across the part.
13. Continuous Vs Batch Processing Oven- Which is Good?
Continuous and batch type processing ovens are two popular types of curing ovens.
You can get both these types of walk-in powder coating ovens from Inovatec.
Both of these ovens are really good.
There are many factors you need to consider before selecting any of these ovens for your process.
The continuous processing oven is designed to handle the continuous curing of parts.
Here, the parts will be loaded in the conveyor hangers, and they will be automatically pushed to the curing oven.
The movement of the parts will happen automatically as per the pre-programmed instructions from the operator.
So, there is no human involvement in the movement of parts.
So, If you want to eliminate human handling of parts, this process is good for you.
This oven is also useful for the automatic powder curing process.
This oven is also suitable for businesses that handle similar part sizes.
The size occupied by the continuous type oven will be more when compared to the batch processing oven.
So, you must ensure that you have a sufficient place in your location.
The continuous powder coating ovens will not have any doors.
Only air curtains will be there at both ends.
OS, the loss of heat will be more in these types of ovens.
If you are interested in curing the metal workpieces in batches, then the batch processing oven is for you.
The batch processing oven allows you to load parts in multiple batches.
If your business handles multiple types of parts in different sizes, then the batch processing oven will be a good choice.
14. What Is The Curing Time For The Parts Using The Walk-In Powder Coating Oven?
On a standard walk-in powder coating oven, it will take 20 to 30 minutes to complete the entire curing process.
The curing time is defined by the powder manufacturer.
So, you need to check the power to know the actual curing times.
Some walk-in ovens come with fast ramp-up times.
So, the overall time for processing the part will be faster.
15. How To Avoid The Orange Peel Effect During The Curing Process?
If you are into the powder coating business, then you definitely don’t want to see the orange peel effect on your powder-coated parts.
It is an unwanted effect on powder-coated parts.
There are many ways to avoid this effect.
Orange peel mostly happens due to the slow ramp-up time of the curing oven.
So, one way to avoid this effect is to preheat the walk-in oven before placing the part inside.
You can also go for a walk-in oven with a faster ramp-up time.
If you have given a thick powder spray coat on the metal workpiece, then also this effect can occur.
So, to avoid a thick powder coat, use the right settings on the powder coating machine while doing the powder spraying process.
16. What Is The Difference Between Dwell Time & Oven Cycle Time?
There are three types of times involved with a walk-in powder coating oven.
They are the oven cycle time, dwell time and bring-up time.
The time taken by the walk-in powder coating oven to reach the curing temperature is called the bring-up time.
The temperature at which the curing happens is called the curing temperature.
The time for which the oven stays at the curing temperature is called the dwell time.
The oven cycle time is the combination of the dwell time and the bring-up time.
17. Is There A Way To Prevent The Outgassing Phenomenon During The Curing Process In A Walk In Powder Curing Oven?
When the gases produced inside the walk-in powder coating oven escape, it is called outgassing.
It will create tiny pores in the powder coating.
It is an unwanted phenomenon.
The moisture present in the atmosphere will get trapped in these small holes, and the coating will start to deteriorate.
Thus, the life of the powder coating will come down.
So, you need to avoid it.
If the surface of the part had contaminants while doing the powder spraying process, then outgassing can happen during the curing process.
So, you need to eliminate all the contaminants from the part surface.
The workpieces need to be subjected to the surface treatment procedure before the powder coating.
You can make use of the sandblasting machine from Inovatec machinery for the surface preparation of the parts.
The preheating of the parts is also useful to remove the contaminants.
The preheating temperature must be greater than the curing temperature.
Outgassing is also seen for thick powder coats.
So, instead of a single thick powder coat, you can give multiple powder coats to achieve the same thickness.
You can also apply primer on the fresh and clean part surface before the powder coating procedure.
It will help to form a strong bond between the powder and the workpiece surface.
Thus, the outgassing phenomenon will not happen.
The quality of the coating powder is another factor.
If you use low-quality coating powder, then the flow of the powder during the curing stage will not be uniform,
It will result in outgassing.
18. Are There Any Safety Issues With The Walk In Powder Coating Oven From Inovatec Machinery?
There are no safety issues for the walk-in powder coating oven from Inovatec machinery.
It is completely safe for the operator as well as the process.
The operator needs to follow the simple operating instructions given in the manual of the walk-in powder coating oven.
You must not alter any of these instructions.
19. Is There Any Training Needed For The Operators To Use The Walk-In Powder Coating Oven?
You don’t have to train your operator to use the walk-in powder coating oven.
The operator can read the simple instructions given in the operating manual of the walk-in oven and use the machine accordingly.
There are no complex instructions involved in the operating of the walk-in powder curing oven.
So, no training is required.
20. Can You Share The Temperature Range For The Walk In Powder Curing Oven?
The walk-in powder coating oven from Inovatec machinery covers almost all temperature ranges.
Thus, it supports all types of coating powders.
It can go for a temperature as low as 325 degrees Fahrenheit for curing.
The highest possible temperature supported by the walk-in oven is 450 degrees Fahrenheit.
21. Can You Explain The Working Of A Standard Walk-In Powder Coating Oven?
The curing of the parts is the last stage in the powder coating procedure.
The parts that are sprayed with powder particles are moved to the walk-in powder coating oven for curing.
Here, the operator will input the necessary curing parameters in the control panel of the walk-in powder curing oven.
The important parameters include the curing temperature and the curing time.
There are gas and electric curing ovens from Inovatec.
The gas oven makes use of an indirect heating technique to heat the oven.
The electric oven uses the direct heating technique.
There will be an airflow system in the chamber that facilitates the uniform distribution of heat across all parts of the oven.
Thus, if there are multiple parts in the oven, then all parts will experience the same temperature for the set duration.
The operator needs to ensure that he takes the oven bring-up time and the curing time separately.
It is ok to leave the parts for few more minutes to cure.
It will help to avoid any under curing issues.
But, make sure that the temperature for curing does not go beyond the specified values.
It can damage the coating as well as the parts.
Once the process is complete, open the oven and take the parts outside.
Let it rest at room temperature for some time.
You will get the final finished parts now.
It is how a typical walk-in powder curing oven works.
22. How Does A Walk-In Powder Coating Oven Help To Improve The Efficiency Of The Powder Coating Process?
The walk-in powder curing oven is usually used in those businesses that handle large parts.
The walk-in ovens can really help to improve the efficiency of the powder coating procedure.
The different ways by which it can help are listed below.
22.1 Provides high-quality part finish
The walk-in powder curing oven is capable of providing a high-quality finish on the workpieces.
All types of textures are possible with walk-in ovens.
You need to ensure that the coating powder used in the process is of very high quality.
Thus, you will get high-quality products as output.
22.2 Provides stable curing temperatures
The walk-in oven provides stable curing temperatures.
So, there won’t be any issues with cracks or orange peels for the cured part.
Thus, it will make the whole process more efficient.
22.3 Uniform distribution of heat inside the oven
The heat generated inside the oven will be uniformly distributed across all parts of the oven.
The airflow system fitted inside the walk-in powder curing oven ensures this uniform distribution.
So, all the parts that are inside the chamber will receive the right amount of heat for curing.
22.4 Fast bring uptime
Inovatec machinery manufactures multiple variants of walk-in powder curing ovens.
Certain models come with fast bring-up times.
These models make use of the direct heating method.
So, if you want to reduce the oven cycle time, then these ovens will be really helpful.
22.5 Lower part damages
There won’t be any part damages happening due to the curing oven.
The temperature inside the oven will not go beyond the set curing temperature.
So, parts will not experience any high temperatures.
23. What Are The Steps Taken By Inovatec Machinery That Ensure The Quality Of The Walk In Powder Coating Oven?
The walk-in powder curing oven from Inovatec machinery is of very high quality.
These best-quality ovens are used in many businesses.
High quality is assured for the oven with the help of certain steps.
These steps are given below.
The walk-in powder curing ovens is manufactured using very high-quality materials.
These raw materials will be purchased from vendors who are on our certified list.
All the raw materials that we procure are subjected to different quality tests,
If it passes the test, then it is used in production.
Or else, it will get rejected.
Our team of certified engineers will strictly monitor our production processes.
Our engineers ensure that all the ovens that come out are of very high quality.
Inovatec engineers will fully test the machine before shipping.
We also allow the customer to come and test the walk-in powder curing oven.
The walk-in powder curing oven will be packed according to international shipping standards.
So, the oven will reach the customer without any defects.
24. Can You Share The Costing Details For The Walk In Powder Coating Oven?
There are multiple walk-in powders curing ovens of Inovatec machinery.
Different walk-in ovens come at different prices.
If you need to do any customization on the oven, then the price will be different.
So, you can send us a message to know the price of different walk-in powder curing ovens.
25. Can You Share The Type Of After Sales Support Given From Inovatec Machinery For The Walk In Powder Coating Oven?
Inovatec machinery is known for customer support.
We offer full support to our customers after the sale of the walk-in powder curing oven also.
The walk-in oven comes with a one-year warranty.
During the warranty time, the customer is entitled to receive the spare parts for free if any of the parts of the oven goes bad.
The shipping charges will be waived off for the spare parts in the warranty period.
If you need a replacement component after the warranty period, you can still get it from us.
It will come at a basic cost.
The technical support is made free for the entire lifetime of the walk-in powder curing oven.
So, you can get in touch with our support team any time for troubleshooting the oven.
26. Can You Share The Different Applications Of The Walk In Powder Coating Oven?
The walk-in powder coating oven comes with many applications.
These applications are given below.
26.1 Curing of Medical Parts
Both large and medium-sized medical parts can be cured using the walk-in powder curing oven from Inovatec machinery.
26.2 Curing of Die-cast parts
Die-cast parts will find the powder coating process very useful to improve the lifespan of the parts.
26.3 Curing of Mechanical Parts
All types of mechanical parts can be cured using the walk-in powder curing ovens of Inovatec.
26.4 Curing of Metallic Cookware Parts
Metallic cookware parts can use the walk-in powder curing oven to enhance the life of the workpieces.
26.5 Curing of Architecture parts
Large architecture parts can be easily cured using the walk-in powder curing oven from Inovatec.
26.6 Curing of Metallic Furniture Parts
Different designs can be given to the metallic furniture parts with the help of the powder coating procedure.
26.7 Curing of Defense parts
The strength of the defense parts can be improved with the help of the powder coating process.
26.8 Curing of Automotive Parts
Many automotive parts can make use of this oven to enhance the looks and life.
26.9 Curing of Electronic parts
The electronic parts that demand insulating and conductive coating can use this oven.
27. Is It Possible To Remove The Powder From Cured Workpieces?
The powder coating can still be removed from the parts after the curing process.
You need to invest in the right type of reagent for removing the coating.
The reagent will make the powder coating melt.
Thus, you can remove it.
You need to check and confirm that the reagent is not harmful to the metal part.
The reagent must not react with the metal part.
The use of a hard-wired metal brush is not recommended to remove the cured powder coating.
It will damage the metal parts.
28. Will The Walk-In Powder Coating Oven Temperature Affect My Parts?
The temperature in the walk-in powder coating oven does not cause any damages to the parts.
The operator needs to ensure that he sets the correct curing temperature.
You must also check and confirm that the curing temperature is compatible with the metal type.
Never operate the oven above the curing temperature.
It can affect the coating as well as the metal parts.
29. How To Select The Best Walk In Powder Coating Oven?
You need to consider lots of factors before selecting a walk-in powder curing oven.
These factors will help you to pick the best oven.
They are given below.
Different businesses will have different use cases.
So, you need to select between a continuous or a batch processing oven first.
The next thing is the fuel type.
Some of the fuel choices include gas, LPG, and electricity.
You need to go with a fuel that is less costly but efficient.
The machine that you select must have all the necessary features.
Don’t invest in ovens with features that you are not going to use at all.
You must be able to customize the walk-in powder curing oven according to your powder coating procedure.
It will ensure that your process is more efficient.
It is a good idea to invest in a walk-in oven that comes with digital controls.
It will give help you to set precise temperatures.
You can select between a direct heating type oven or an indirect heating type oven.
Don’t forget about the cost factor.
You must consider the machine cost, machine maintenance cost, and operational cost into account while making the selection.
Inovatec machinery offers multiple models of walk-in powder curing ovens.
So, you can easily choose one that suits your needs.
30. How To Check If The Powder Coating Is Cured Or Not?
After completing the curing process, you need to ensure that the coating is properly cured.
You can check the curing on the part in multiple ways.
The color matching test can be done on the cured parts.
It is the easiest test to do.
Here, the cured part color is checked against the sample part.
You can also go for a MEK test.
Methyl Ethyl Ketone reagent is applied on the part surface after curing.
Degradation of the color of the cured part is a clear indication of under-curing.
You can also use a gloss meter to check the powder coating.
A gloss meter will give you a reading from the cured part surface.
You can cross-check the reading from the sample part.
It is one of the best methods used in the industry.
31. What Is The Part Size Supported By The Walk-In Powder Coating Oven?
The walk-in powder coating oven is designed to handle large parts.
So, you can use it for large parts as well as for medium size parts.
The large size of the oven allows you to place multiple parts inside the oven.
So, you can cure multiple parts at the same time.
The walk-in powder coating ovens from Inovatec machinery are some of the best in the market.
Inovatec machinery provides a complete solution for the powder coating process.
You can contact us for powder coating machines, powder coating guns, powder coating booths, conveyor lines, and powder coating ovens.
We offer different types of customizations also for this machine.
You can invest in our powder coating solutions with confidence.