English 
Español 
Français 
ZAM66 Single Wheel Media Rotary Polisher
- Technical Data
- Video
| Rim size | 12″-24″ |
| Barel diameler | 960mm |
| Qty for Media | 350kg/Barrel |
| Media For fine polshing/Buffing | 3-3.5mm “Zirconia toughnened alumina balls” |
| Media For deburring and rerusting | 5-6mm “Ceramic deburring ball” |
| Voltage | 220V/380V;50HZ/60HZ;1Ph/3ph |
| Motor power | Main shaft motor:1.5 KW barrel motor:1.1 KW |
| N.W. | 350kg, media not included |
| Packing size | 1000X1800X1800 MM |
Related Products
ZAM66 Single-Wheel Media Rotary Polisher — deburring, de-rusting and polishing in one machine
The ZAM66 single-wheel rotary polisher is built for alloy wheel finishing where more than just polishing is needed. With a large 350 kg media capacity and a two-media process, it handles heavier deburring and rust removal as well as fine polishing — making it a strong choice for wheels that arrive oxidized, scaled or with casting burrs.
The wheel is mounted on a rotating shaft inside a 960 mm barrel while finishing media flows across the rim face, spokes and barrel. A 1.5 kW main shaft motor drives wheel rotation for uniform, repeatable contact, so operators get consistent results across every batch without trial and error.
- Two-media process — ceramic deburring balls for cutting, zirconia balls for final shine
- Large 350 kg media capacity for heavier finishing loads
- Removes casting burrs, oxidation, scale and light rust
- Restores brightness while protecting rim edges and spokes
At a glance
| Recommended rim size | 12″ – 24″ |
| Barrel diameter | 960 mm |
| Media capacity | 350 kg / barrel |
| Polishing media | Zirconia-toughened alumina, 3–3.5 mm |
| Deburring media | Ceramic deburring balls, 5–6 mm |
| Main shaft motor | 1.5 kW |
| Barrel motor | 1.1 kW |
| Machine weight | 350 kg (media not included) |
Before & after on a real wheel
The ZAM66 removes oxidation, casting burrs and light rust while protecting rim edges and spokes.
Two-media finishing process
The ZAM66 uses two media types across the cycle — heavier ceramic balls for cutting and deburring, then zirconia balls for brightening. Exact staging and timing depend on wheel condition and the target finish.
| Step | Stage | Media | Result |
|---|---|---|---|
| 1 | Deburr & de-rust | Ceramic deburring balls, 5–6 mm | Burrs, scale and light rust removed |
| 2 | Fine polish & shine | Zirconia-toughened alumina balls, 3–3.5 mm | Bright, clean, smooth finish |
Who the ZAM66 single-wheel is built for
Wheel repair shops handling rough wheels — the two-media process tackles oxidation, scale and burrs that a polish-only machine can’t, so heavily weathered wheels come out clean in one workflow.
Refurbishment factories — the large 350 kg media load and stronger main motor suit steady batch processing of wheels in varied condition.
Wheel manufacturers — add a controlled deburring-plus-finishing step after casting or machining, removing burrs and improving surface uniformity in one pass.
Wheels the ZAM66 handles
 Passenger car wheel |  SUV / light-truck wheel |  Multi-spoke design | Restored oxidized wheel |
ZAM66 single-wheel full specifications
| Rim size | 12″ – 24″ |
| Barrel diameter | 960 mm |
| Media quantity | 350 kg / barrel |
| Media for fine polishing / buffing | Zirconia-toughened alumina balls, 3–3.5 mm |
| Media for deburring & de-rusting | Ceramic deburring balls, 5–6 mm |
| Voltage | 220V / 380V · 50/60Hz · 1Ph / 3Ph |
| Motor power | Main shaft motor 1.5 kW · Barrel motor 1.1 kW |
| Net weight | 350 kg (media not included) |
| Packing size | 1000 × 1800 × 1800 mm |
Specifications subject to change without notice. Contact our engineering team for detailed drawings and custom requirements.
Compare the wheel polisher range
Not sure which model fits your rim sizes and volume? Here’s how the ZAM series lines up. Our team can confirm the right one from your wheel samples.
| Model | ZAM66 Single-Wheel | ZAM76 Up-Lift | ZAM66 Double-Wheel |
|---|---|---|---|
| Media capacity | 350 kg | 200 kg | 350 kg |
| Wheels per cycle | 1 | 1 | 2 |
| Deburring media | Yes (ceramic) | Polishing focus | Yes (ceramic) |
| Best for | Rough / oxidized wheels | Daily polishing, easy load | Higher throughput |
* Confirm final specifications with our engineering team before ordering.
Why Inovatec — a finishing partner, not just a machine seller
| 15+ Years in mass finishing Focused on vibratory and tumbling finishing equipment and media. | 24h Reply on inquiries Technical questions answered fast so your buying decision isn’t stuck waiting. | Free Wheel sample testing Send us a wheel — we run it and show you the achievable finish before you commit. |
| 60+ Countries served Export packing and documentation handled as standard. | CE Compliant build Machines built to meet export safety requirements. | 1:1 Process support We recommend media, compound and cycle settings for your specific wheels. |
Download the specification sheet
Full specs, model range and finishing options in a one-page datasheet you can share with your team.
↓ Download ZAM66 Spec Sheet (PDF)
| See the finish before you buy Send us one of your wheels. We’ll run it on the ZAM66, send you before/after results, and quote a factory-direct price with the right media package. Our team replies within 24 hours. |