☎ +86173 6954 9578 ｜ 📍 Huzhou, Zhejiang, China ｜ ✉ [email protected]
15+ Years · 1,000+ Customers · 60+ Countries Served
  • Inovatec Machinery WRC30 Wheel CNC Lathe Machine 4
  • Inovatec Machinery WRC28 Wheel CNC Lathe Machine 2
  • Inovatec Machinery WRC28 Wheel CNC Lathe Machine 3
  • Inovatec Machinery WRC30 Wheel CNC Lathe Machine 1
  • Inovatec Machinery WRC30 Wheel CNC Lathe Machine 2
  • Inovatec Machinery WRC30 Wheel CNC Lathe Machine 3
  • Inovatec Machinery WRC30 Wheel CNC Lathe Machine 6

WRC30 Wheel CNC Lathe Machine- Top Quality Machine

The WRC30 Wheel CNC Lathe Machine is capable of repairing alloy wheels of trucks and cars. The fast processing feature of this machine helps to repair more wheels at the same time. You can send us a message to receive a free quote.
  • Technical Data
  • Standard Configuration
  • Video
ModelWRC30
Max. swing over bedΦ800mm (31’)
Max. swing over cross slideΦ550mm
Max. size of alloy wheel30’
Cross slide travel360mm
Width of the rail400mm
Length of the rail1630mm
Size of the 3-jaw chuck15’
Range of spindle speed50~1600rpm
Spindle speed controlAutomatic
Spindle boreΦ82mm
The taper of spindle bore1:20/Φ 90
The taper of the spindle noseD1-8
Max. size of tool post25×25mm
Stations of tool carrier4 position
Min. setting unit of motor(Z) long   0.001mm

(X) cross  0.001mm

Moving speed of the post(Z) long    8m/min

(X) cross   4m/min

Motor power11kw
Machine baseWhole cast iron base
Machine size (L*W*H)2430*1730*1840mm
Net weight3500kg
  • Diamond tool holder
  • Three-jaw manual chuck (one pair of special soft jaws)
  • Ruby digital probe
  • Taiwan’s new generation CNC system
  • Common quick-change tool holder, four-station
  • Automatic lubrication system
  • Cooling system
  • Full protection (safety protection door)
  • Common tools and toolboxes
  • Dedicated hub curve optimization software

Related Products

WRC30 Wheel CNC Lathe Machine — high-power CNC lathe for professional alloy wheel diamond-cut refurbishment up to 30 inches

The WRC30 is the top-specification horizontal-spindle CNC wheel lathe in the Inovatec range. Powered by an 11 kW motor on a whole cast iron base, it handles alloy wheels up to 30 inches in diameter and is built for workshops where throughput, motor power and long-term structural stability are the primary requirements. The 15″ 3-jaw chuck with special soft jaws accommodates large-diameter wheels comfortably; the automatic spindle speed control (50–1600 rpm) adjusts cutting parameters between passes without operator input.

Like the WRC28, the WRC30 ships with a ruby digital probe, Taiwan new-generation CNC system and dedicated hub curve optimisation software. The probe automatically reads the wheel surface profile, converts it to G-code, and the machine executes the cutting program — 0.05 mm per pass, repeated as needed — without manual programming. At 3500 kg, the WRC30 is a production machine; its mass and cast iron base eliminate the vibration and chatter that reduce cut quality and tool life on lighter machines processing large-diameter rims.

  • 11 kW motor — the most powerful in the Inovatec wheel lathe range
  • 30″ maximum wheel size — covers passenger car, SUV and light commercial fitments
  • 15″ 3-jaw chuck with soft jaws — secure clamping for large alloy wheels
  • Whole cast iron base, 3500 kg — vibration-free cuts at full capacity
  • Ruby probe + hub optimisation software — no-programming DC refurbishment workflow

At a glance

ModelWRC30
Max. wheel size30″
Motor power11 kW
Spindle speed50–1600 rpm (automatic)
Chuck size15″ (3-jaw, with special soft jaws)
Machine baseWhole cast iron base
Net weight3500 kg
Warranty1 year (parts; lifetime technical support)

How the WRC30 machines a wheel

The ruby digital probe reads the alloy wheel surface profile automatically. The profile is converted to G-code; the cutting program runs without manual operator programming. Each diamond-cut pass removes 0.05 mm from the wheel face. Two to three passes typically achieve the target finish.

StepWhat happens
1. MountWheel clamped on 15″ 3-jaw chuck with soft jaws
2. ProbeRuby probe detects wheel surface geometry; profile stored and converted to G-code automatically
3. CutDiamond cutter makes 0.05 mm passes; 2–3 passes to achieve target diamond-cut surface
4. Store profileWheel profile saved to machine database — next time the same model is processed, setup is faster
5. LacquerWheel moves to spray booth for clear lacquer protection (separate equipment)

Who the WRC30 is built for

High-volume alloy wheel refurbishment facilities — the 11 kW motor, 3500 kg cast iron base and automatic spindle control are sized for continuous production, not occasional use. The machine stores wheel profiles; recurring models process faster with each subsequent run as the database grows.

Shops regularly processing large or heavy wheels — the 30″ capacity, 15″ chuck and higher motor power are necessary for reliably machining the large-diameter SUV, light commercial and performance vehicle wheels where a 7.5 kW machine would be under-powered at full diameter.

Operations prioritising long-term build quality — at 3500 kg, the WRC30 is built to run without flex, vibration or structural fatigue over years of production use. The 1-year parts warranty with free replacement shipping and lifetime technical support reflect Inovatec’s standard service commitment.

WRC30 vs WRC28 — which machine fits your work?

WRC30WRC28
Max. wheel size30″28″
Motor power11 kW7.5 kW
Chuck size15″12″
Net weight3500 kgNot specified
Rail width400 mm300 mm
Best forHigh volume, large / heavy wheels, production environmentStandard passenger vehicle wheels, moderate volume

Standard configuration

Diamond tool holder
3-jaw manual chuck (15″) with one pair of special soft jaws
Ruby digital probe (automatic surface profiling)
Taiwan new-generation CNC system
Common quick-change tool holder, 4-station
Dedicated hub curve optimisation software
Automatic lubrication system
Cooling system
Full protection safety door
Common tools and toolbox

WRC30 full specifications

ModelWRC30
Max. swing over bedΦ800 mm (31″)
Max. swing over cross slideΦ550 mm
Max. alloy wheel size30″
Cross slide travel360 mm
Width of rail400 mm
Length of rail1630 mm
3-jaw chuck size15″
Spindle speed range50–1600 rpm (automatic)
Spindle boreΦ82 mm
Max. tool post size25 × 25 mm
Tool carrier stations4 position
Min. setting unit (Z / X)0.001 mm / 0.001 mm
Moving speed of post (Z / X)8 m/min / 4 m/min
Motor power11 kW
Machine baseWhole cast iron base
Machine size (L×W×H)2430 × 1730 × 1840 mm
Net weight3500 kg

Specifications subject to change without notice. 1-year parts warranty; lifetime technical support included.

Why Inovatec — a finishing partner, not just a machine seller

11 kW
Most powerful wheel lathe in range
Sized for continuous production on large-diameter alloy wheels.		24h
Reply on inquiries
Technical questions answered fast so your buying decision isn’t stuck waiting.		Lifetime
Technical support
Free technical support for the life of the machine, plus 1-year parts warranty.
60+
Countries served
Export packing and documentation handled as standard.		CE
Compliant build
Machines built to meet export safety requirements.		Full
Wheel line supplier
Lathes, blasters, booths, ovens — source your complete refurbishment line from one maker.

Download the specification sheet

Full WRC30 specs in a one-page datasheet you can share with your team or use in purchasing approval.

↓ Download WRC30 Spec Sheet (PDF)

Setting up a wheel diamond-cut refurbishment station?

We supply the complete line — CNC lathe, wet blaster, powder coating booth and oven — matched to your space and volume. Factory-direct price, reply within 24 hours.

WRC30 Wheel CNC Lathe – FAQs

1. Why does the WRC30 need an 11 kW motor when the WRC28 uses 7.5 kW?
Cutting torque requirements scale with wheel diameter and material mass. At 30 inches, the wheel face is significantly larger than at 28 inches, and many wheels in this size class — SUV rims, light commercial wheels — are heavier than standard passenger car alloys. The 11 kW motor provides the torque headroom needed to maintain consistent cutting conditions across the full face without speed drop-off, which is what produces a uniform surface finish.
2. How does the ruby probe work, and does the operator need to do any programming?
The ruby digital probe touches the wheel surface at multiple points to map the actual face geometry. This data is fed into the hub curve optimisation software, which generates the G-code cutting program automatically. The operator powers on the machine, clamps the wheel, initiates the probe cycle and confirms the cut — no manual G-code writing at any stage. Once a wheel model has been profiled, the data is stored; repeat jobs run faster.
3. How many passes does it take to produce a diamond-cut finish?
Typically 2–3 passes at 0.05 mm per pass. The first pass (rough cut) removes the damaged surface layer, corrosion and old lacquer. The second pass brings the surface to near-finish condition. A final finishing pass with the diamond cutter produces the bright-machined DC surface. Heavily damaged wheels may need an additional rough-cut pass before finishing.
4. What does the warranty cover, and what is lifetime technical support?
The 1-year warranty covers parts that fail during normal operation within the warranty period; Inovatec replaces them free of charge with free shipping. Lifetime technical support means the Inovatec support team remains available for technical questions — operation, troubleshooting, tooling advice — for the life of the machine, not just during warranty. On-site training at the Inovatec facility is also available for engineering staff.
5. What power supply and installation requirements does the WRC30 need?
The 11 kW motor requires a three-phase supply; voltage confirmed at order stage. The machine footprint is 2430×1730 mm and net weight is 3500 kg. Floor loading capacity, access for fork-lift or crane installation, and three-phase supply availability should all be confirmed during pre-purchase planning. Contact us for a full installation checklist.
6. Can the WRC30 repair structurally bent wheels?
No. The WRC30 is a surface machining lathe. It machines the wheel face to restore finish and profile. Structural damage — bent flanges, cracked spokes, impact deformation — must be corrected with a hydraulic wheel straightening press before the wheel is loaded onto the lathe.
7. What cutting inserts are compatible with the WRC30?
The 4-station quick-change tool post accepts standard 25×25 mm tooling. PCD (polycrystalline diamond) inserts are used for the final DC finishing pass; DCMT and VCMT carbide inserts are used for roughing. Both can be sourced from any compatible tooling supplier. Diamond inserts are included in the standard configuration.
8. Do you provide export packing and documentation?
Yes. We handle standard export packing and shipping documentation for delivery to 60+ countries. Operation manual, tooling, soft jaws and training materials are supplied with the machine. Contact us to confirm lead time and freight options for your destination.
Send Your Inquiry Today