Inovatec Machinery Providing High-Quality Powder Coating Oven For Wheels For Customers
Inovatec machinery offers the best quality powder coating ovens for curing wheel parts of automobiles. The high-quality raw materials used in the production of these powder curing ovens guarantee a high-quality finish on the wheel parts. We will provide a complete solution for powder coating wheels. It includes the conveyor system, powder coating machine, powder coating booth, and powder spray gun also. We have our distributors for the powder coating oven for wheels in many locations. So, you can contact our distributors to place the order, or you can place the order directly with us.
The powder coating gun is essential for spraying the powder particles on the wheel surface.
Inovatec supplies different variants of spray nozzles with the powder coating gun.
The gun is capable of handling all types of wheels.
The different customizations offered by Inovatec allow you to optimize the spray gun according to your workflow.
The powder spray booth is essential to get top quality powder spray coat on the wheels.
They also help to reuse the powder particles that get suspended in the air.
The booth comes with a proper filtration system to remove the dust, oil, and dirt present in the booth.
Thus, always provide a clean environment for the powder spraying process.
The powder coating machine from Inovatec machinery supports multiple powder sizes.
The machine helps to get all types of finishes on the wheels with the help of different current and voltage settings.
Inovatec machinery manufactures multiple varieties of powder coating machines, and it is possible to customize the machine according to your workflow.
Sand Blasting Machine for Pre-Coating Finishing
The sand blasting machine is one of the popular machines used for the surface treatment of wheels before the powder coating procedure. The machine makes use of the wet blasting process for cleaning the wheels. Water in the process helps ort remove any dirt or dust created during the process. The water also helps to reduce the abrasive effect of the abrasives. Thus, the loss of material will be very less. The wheels will not suffer any discoloration. Inovatec machinery uses high-quality raw materials for the manufacturing of the sand blasting machine. This machine helps to remove all the contaminants present on the surface of the wheel.
- Top-quality raw materials for production
- Complete technical support
- Support for replacement parts
- Manufacturing process under the supervision of experienced engineers
The powder coating ovens for wheels can be shipped to any part of the world. We have been shipping our powder coating solutions to various countries. There are no restrictions on shipping for us. Our distributors are located in many places. So, you can go ahead and place the order with our distributor or with us.
The powder coating oven for wheels from Inovatec machinery comes with one year warranty.
Inovatec machinery will provide lifetime technical support for the powder curing ovens for the wheels. So, you can contact our support team anytime for any type of technical help for the oven. If any of the components of the powder curing oven for wheels go bad in the warranty period, the customer can get in touch with us to get the free replacement part. The replacement parts will be shipped free of cost. The spare parts are also made available after the warranty period. Once the warranty period gets expired, the spare parts are available for a basic cost.
The shipping method will actually depend on the type of the order. Inovatec machinery accepts both small orders as well as bulk orders. If it is a small order for the powder curing oven, then we will use the express sea shipping method to ship the curing oven. If the order is a bulk one, then we will opt for the standard sea shipping method. If you have any urgent requirement of the machine, you can inform us before. We will ship accordingly.
Inovatec machinery offers multiple payment options for the powder curing oven. PayPal, Western Union, Bank Transfer, and MoneyGram are the different payment options. If the payment is done through credit card, we will not accept it. So, make sure to use any of the mentioned methods to make the payment for the oven.
The customer needs to share the customization request along with the curing oven if any. Inovatec machinery will share the costing quote according to these customizations. The customer will have to pay an advance amount of 30 percent. Inovatec machinery will go ahead with all the production activities of the powder curing oven only after getting the advance amount. So, please make sure the advance is paid at the earliest to avoid any delays. You can pay the balance amount before we ship the oven.
FAQ for Powder Coating Oven For Wheels–Frequently Asked Questions
The process of powder coating of wheels helps to improve the lifespan of the wheels as well as their looks.
We will learn about more benefits of using powder coating ovens from Inovatec machinery for wheels in this guide.
Inovatec machinery supplies high-quality powder coating ovens.
The other powder coating solutions from Innovatec machinery include the powder spraying gun, powder coating machine, conveyor system, and powder spray booth.
So, if you are looking for a complete powder coating solution for your wheels, then you can choose the whole solution from us.
The multiple types of powder coating ovens offered by Inovatec machinery help select a machine with the necessary features.
- 1. What Are The Benefits Of Powder Coating Wheels?
- 2. Powder Coating Vs Painting- Which Is Best For Wheels?
- 3. Can You Share The Advantages Of Using Powder Coating Ovens From Inovatec For Curing Wheel Parts?
- 4. What Colors Can Be Given To The Wheels Through Powder Coating?
- 5. What Type Of Finish Can Be Given To The Wheels Through The Curing Process?
- 6. Gas Vs Electric Powder Coating Ovens – Which Is Best For Wheels?
- 7. How Long Does The Powder Coating Last On The Wheels?
- 8. Is It Possible To Increase The Life Of The Powder Coating On The Wheels?
- 9. How To Select The Best Powder Coating Oven For Wheels?
- 10. Continuous Vs Batch Processing Convection Oven- Which is Best For Wheels?
- 11. Which Heating Technique Is Best For Curing The Wheels?
- 12. What Type Of Finish Is Possible For The Wheels With The Powder Coating Ovens From Inovatec Machinery?
- 13. Which Are The Different Types Of Wheels That Are Supported By The Powder Coating Ovens From Inovatec Machinery?
- 14. How Can I Check The Curing On The Wheels?
- 15. Can You Explain The Working Of A Standard Powder Coating Oven For Wheels?
- 16. What Is The Maximum Possible Curing Time For The Wheels?
- 17. Does The Size Of The Powder Particles Affect The Coating Process For Wheels?
- 18. Is It Safe To Use The Powder Coating Oven From Inovatec Machinery For Curing Wheels?
- 19. What Are The Possible Reasons For Cracks In The Powder Coat On Wheels After The Curing Process?
1. What Are The Benefits Of Powder Coating Wheels?
There are numerous benefits of powder coating the wheels.
1.1 Helps to increase the Wheel life
The lifespan of the wheel can be increased through the powder coating process.
It helps to provide an additional layer of coat on the surface of the wheel.
Thus, the surface of the wheel is not exposed to harmful contaminants.
So, the life of the wheel can be enhanced with the help of the coating.
1.2 For looks
Any type of finish is possible for the wheels with the help of the powder coating process.
So, the looks and aesthetics of the wheel can be significantly improved through powder coating.
It will help to improve the value of your product.
1.3 Protection from rust
Wheels made up of steel are susceptible to corrosion.
The coating layer helps to cut off the direct contact of the wheel with the atmosphere.
Thus, it protects the wheel from rusting.
1.4 To Increase the resistance
The resistance of the wheel can be increased by the powder coating process.
So, it reduces the damage on the wheels.
1.5 To enhance the part durability
The wheels become more durable with the help of the powder coating.
1.6 Better coating coverage
The powder coating provides better coverage on the wheels.
The powder coating process ensures that the powder gets coated on all the areas of the surface. It is possible to deposit the powder in the hard-to-reach areas of the wheels.
1.7 Helps to provide thicker coats
You can get a coating of higher thickness using the powder coating process.
Powder coating supports multi coats.
So, you can give one coat on top of the other.
It helps to strengthen the protection on the wheels.
1.8 High-quality finish on the wheels
The powder coating helps to provide a high-quality finish on the wheels.
Thus, the quality of the final part can be improved drastically with the help of this process.
1.9 Supports different types of Finish
You can give different types of finish to the wheels using the powder coating.
Some of the popular finishes used in the wheels include satin, high gloss, low gloss, and matte finish.
All types of textures are supported by the coating powders.
1.10 Supports all colors
It is possible to provide any color to the wheels with the help of the powder coating process.
Almost all types of colors are supported by the coating powders.
2. Powder Coating Vs Painting- Which Is Best For Wheels?
Wet painting and powder coating are the two options for coating the wheels.
The powder coating process helps to provide a thicker coat on the wheels.
The coating will be thin in the case of the wet painting process.
So, more protection can be given to the wheels with the help of the powder coating process.
Any type of texture and finish is possible with the help of the powder coating.
The wet painting does not support all finishes.
The wet paint makes use of volatile organic compounds.
So, when you keep the wheels drying after the wet painting, these volatile organic compounds will escape.
So, it pollutes the environment.
The powder coating process does not cause any kind of pollution.
It is an environmentally friendly process.
When you use wet paint, it will take more time to dry.
But, the powder coating process is faster than the wet painting process.
There will be dripping and sagging of paints from the wheels during the wet painting process.
It is because of the reason that the wet painting process is a high-pressure process.
There is no dripping and sagging phenomenon in the case of the powder coating process.
It is a low-pressure process.
So, the wastage of the material is less in the case of powder coating.
You can also recollect and reuse the powder material if you conduct the powder coating inside the dedicated powder spray booth.
The booth comes with the feature of powder reclamation.
It is possible to reclaim about 98 percent of the powder particles.
So, the powder utilization will happen more efficiently in a powder coating process.
Due to the above reasons, the powder coating process has a slight upper hand over the wet painting process.
3. Can You Share The Advantages Of Using Powder Coating Ovens From Inovatec For Curing Wheel Parts?
Inovatec machinery offers high-quality ovens for curing wheels.
There are plenty of advantages in using these powder curing ovens of Inovatec machinery.
These benefits are listed below.
3.1 Multiple customization options
Inovatec machinery provides multiple customization options for the powder coating ovens for wheels.
Different ovens come with different customization options.
Customer can share their customization requests while placing the order for the oven.
These options help the customers to optimize the oven according to their workflow.
It really helps to increase the productivity and efficiency of your process.
3.2 Choice of power supply
The power standards will vary for different countries,
Some countries will use 110-volt power, and others will use 220-volt power.
Inovatec machinery allows the customer to select the power supply for the oven according to their country’s power specifications.
It avoids the additional expense on a power switcher to switch between these standards if the power source is different in your country.
3.3 Easy to maintain ovens
All the powder curing ovens for wheels from Inovatec machinery are easy to maintain.
There are no complex maintenance instructions.
You can perform all the maintenance work using a normal maintenance toolkit.
No special tools are needed.
You don’t need to take any special pieces of training also.
You can just follow the simple maintenance instructions given in the manual.
3.4 Cost-effective option
The powder coating oven for wheels from Inovatec machinery comes at an affordable price.
There are plenty of coating oven models to choose from.
The operation cost can be lowered if you select a model that makes use of less expensive fuel.
The maintenance cost is very less for the coating ovens from Inovatec machinery.
They help in delivering a high-quality finish on the wheels.
So, these ovens are cost-effective.
3.5 Choice of fuels
Inovatec machinery produces coating ovens that support different types of fuels.
The curing ovens from Inovatec support diesel, gas, electricity, and LPG.
You can choose any of these fuels.
The choice of fuel needs to be made based on their cost and availability.
3.6 Availability of replacement parts
All the replacement parts of the powder coating ovens are made available for the entire lifetime of the oven.
The spare parts are available for free if the replacement needs to be done within the warranty period.
3.7 Technical support
If you need to troubleshoot any technical issues with the powder coating oven, then you can contact us.
Inovaetc’s support team will help you to fix all the technical issues related to the curing oven.
3.8 Eco-friendly option
There is no toxic waste produced from the powder coating oven.
So, it will not pollute the atmosphere.
It is an environment-friendly oven.
3.9 Multiple finishes
Different types of finish are possible with the help of the powder curing oven from the Inovatec.
These finishes are possible with the help of the wide range of temperatures supported by these curing ovens.
3.10 Stable Curing temperature
The coating ovens from Inovatec machinery always provide stable curing temperatures.
There won’t be any fluctuations in the temperature.
So, the curing will be perfect.
There won’t be any under-curing or cracking of powder coats in the wheels if you follow the instructions correctly.
3.11 Support for different powder sizes
The powder coating oven supports all powder sizes.
So, you can use the same oven for curing multiple powders on the wheels.
3.12 Process time
The processing time will vary for different types of powder curing ovens from Inovatec.
Some of the ovens use the direct heating method, and the others use the indirect heating method.
The ovens that make use of the direct heating method will come with faster ramp-up times.
So, the overall processing time will be faster in such ovens.
So, if you are looking to increase your productivity, then these ovens will be good for you.
4. What Colors Can Be Given To The Wheels Through Powder Coating?
The color of the powder coat is decided by the coating powder.
Almost all types of coating color powders are available in the market.
The coating ovens from Inovatec support all the coating powders.
So, any color can be given to the wheels using the powder coating ovens from Inovatec machinery.
5. What Type Of Finish Can Be Given To The Wheels Through The Curing Process?
The finish on the wheels is decided by the coating powder type.
All types of finishes are available in the market.
Some of the popular finishes applied on the wheel include the matte, glossy, ultra gloss, low gloss, and satin finish.
You can decide the finish that you want on the wheels.
You need to choose the coating powder accordingly.
Any type of texture is also possible with the coating powders.
All coating powders can be cured inside the powder coating ovens from Inovatec machinery.
6. Gas Vs Electric Powder Coating Ovens – Which Is Best For Wheels?
The gas powder coating oven makes use of the gas as the fuel for heating the oven.
The electric powder coating oven uses electricity as the fuel for curing the parts.
Both gas and electric ovens are equally good.
But, there are some differences between the two.
Understanding these differences between these ovens will help you to choose the right type of oven.
The gas curing oven makes use of the indirect heating technique.
The bring-up time of the gas oven will be more.
The electric curing oven uses the direct heating technique.
So, the bring-up time of the electric oven will be less.
Thus, the overall processing time will be less for the electric oven.
So, an electric oven will help you to cure more parts at the same time.
When it comes to the heat distribution factor, the gas uniform distributes the heat more evenly than the electric curing oven.
It is because of the indirect heating technique.
Another thing to consider is the cost.
Inovatec offers different models of gas and electric coating ovens.
They are available in various price ranges.
So, you can easily select one according to your budget.
The maintenance cost is more or less the same for both these types and is less.
When you take the operational cost, you can bring down the operational cost if you invest in an oven that uses a less expensive fuel.
If you compare the cost of electricity and gas, then gas is less expensive in most places.
Gas curing ovens come in very large sizes when compared to electric ones.
So, if you are looking to run the oven with a large batch of wheels for curing, then you can have a look at these large ovens.
You can make a decision based on the above-listed factors.
7.How Long Does The Powder Coating Last On The Wheels?
The powder coat on the wheels will last for many years.
However, the life of the coating will also depend on the quality of the powder used.
8.Is It Possible To Increase The Life Of The Powder Coating On The Wheels?
There are different ways by which you can increase the life of the coating on the wheels.
They are given below.
The coating thickness is one major factor.
If you provide a thick powder coat on the wheel, then it will last longer than a thin powder coat.
In order to provide a thicker coating, you will have to do multiple coats.
The usage of the wheel is another factor.
If you use the wheels heavily, then the lifespan of the coating will be reduced.
The cleaning of the wheels is another factor.
If you clean the wheel on a regular basis, then you can enhance the coating life.
It will help to remove the contaminants from the coating surface.
If the wheel is used in extreme conditions like high temperatures, then life will come down.
It is recommended to give a primer coat on the wheel before applying the powder coat.
It will help to increase the lifespan of the powder coating through a strong bond between the wheel surface and the powder.
You must also ensure that the powder coating on the wheel is cured properly after the curing process.
You must never use a cheap coating powder on the wheels.
Such powders will have poor quality.
So, the life of the coating will be very less.
Always invest in high-quality coating powders.
It will guarantee a long lifespan if used with the right type of oven.
9. How To Select The Best Powder Coating Oven For Wheels?
When you are selecting a powder coating oven for wheels, you need to consider many factors.
It will help you to choose the best curing oven.
These factors are listed below.
9.1 Cost factor
The price is one of the important factors that decide your curing oven.
You need to consider many types of costs associated with the powder coating oven.
They are the oven cost, the operational cost of the oven, and the maintenance cost of the oven.
The fact that Inovatec machinery manufactures a wide range of curing ovens for wheels makes it possible to choose an oven that comes in your budget range.
You need to ensure that the operational cost of the curing oven is affordable for you.
The fuel type used in the oven mainly decides the operational cost.
So, choose accordingly.
The cost of maintenance is less for all the powder curing ovens from Inovatec.
9.2 Fuel Type
There are many types of fuel used in the curing oven. It includes gas, electricity, diesel, and LPG.
When you make the fuel selection ensure that the fuel is cheaper for you.
The availability of the fuel in your place should also be considered.
9.3 Heating method
Some oven uses the direct heating method, and others use the indirect heating method.
The oven that uses the direct heating method will have a faster processing time.
The ramp-up time will be less for such an oven.
The electric curing oven is a direct heating type oven.
The gas curing oven is an indirect heating type oven.
The ramp-up time will be more for the gas curing ovens.
9.4 Wheel size
The size of the wheels that you are using is another factor.
If you use wheels of different sizes, then you must select the oven in such a way that you can use the same oven to cure all the wheel sizes.
9.5 Wheel quantity
The number of wheels that you are planning to cure is another factor.
If you deal with a huge number of wheels for powder coating, then you can consider the continuous curing oven for wheels.
It will help to cure more parts at the same time.
The batch processing oven is another option.
9.6 Customize the oven
You must ensure that the powder coating oven for wheels is customized according to your needs.
It will help to improve your curing workflow.
Thus, the process will be more efficient.
9.7 Digital Controls
The digital controls in the oven will help you to set more precise values for the curing temperature.
So, always go for an oven that comes with this feature.
10. Continuous Vs Batch Processing Convection Oven- Which is Best For Wheels?
Continuous and batch processing powder coating ovens are two types of curing ovens.
In order to select between these two types for the coating of wheels, you need to consider some factors.
These factors are listed below.
The continuous processing oven helps to remove the dependency on human laborers for the curing of parts.
It will help you to space on the labor cost.
The wheel will be moved in and out of the oven automatically.
Conveyor lines will be used for the movement of the wheels.
The movement can be programmed by the operator.
It helps to save a good amount of time.
The heat loss will be more in the case of the continuous powder coating ovens since there are no doors in this oven.
There will be air curtains at both the ends of the oven
The space occupied by the continuous processing powder coating oven will be more compared to the batch processing ovens.
You need to invest in the conveyor system for the continuous processing ovens.
If you deal with wheels of similar sizes, then the continuous processing oven can be a good option.
If you have multiple wheel sizes, then the batch processing oven can do a better job.
You can divide the parts into multiple batches of different sizes and load the parts in batches into the oven.
When it comes to the oven cost, the continuous one will be costlier than the batch processing oven.
But, the productivity will be more for the continuous processing oven.
11. Which Heating Technique Is Best For Curing The Wheels?
There are two heating techniques employed by the powder coating oven for wheels.
These are the direct and indirect heating techniques.
There is nothing like the best heating technique.
Both of these techniques have got their advantages as well as disadvantages.
You can see the pros and cons of both these techniques below.
It will help you to decide which is best for curing wheels.
If you apply the heat directly on the wheels, then it is called the direct heating technique.
The ramp-up time will be short for the direct heating technique.
So, the oven cycle time will be less.
It will help you to cure more wheels at the same time.
But, the heat distribution will not be uniform.
The oven that uses this technique will cost more.
The electric curing oven is an example of an oven that uses this technique.
If the oven applies the heat to the part for curing indirectly, then it makes use of the indirect heating technique.
This technique guarantees a more uniform distribution of heat across the oven.
The ramp-up time will be more for the indirect heating method.
So, the oven cycle time will be more.
12. What Type Of Finish Is Possible For The Wheels With The Powder Coating Ovens From Inovatec Machinery?
Any type of finish is possible with the powder coating ovens from Inovatec machinery.
You can give finishes like satin, high gloss, low gloss, ultra-clear, and matte finish with these curing ovens.
You can also get various textures on the wheels.
The finish on the part is decided by the coating powder type.
All powder types are supported by Inovatec’s powder curing ovens.
So, all finishes are supported.
13. Which Are The Different Types Of Wheels That Are Supported By The Powder Coating Ovens From Inovatec Machinery?
The wheels are manufactured using different metals.
Metal alloys are also used in the production of wheels.
All the metal and metal alloy wheels are supported by the powder curing ovens from Inovatec machinery.
Before using the coating powder with the wheel, you must ensure that the coating powder is compatible with the material of the wheel.
Otherwise, the curing temperature of the coating powder can affect the wheel.
14. How Can I Check The Curing On The Wheels?
After the completion of the curing process, it is essential to check the curing on the wheels.
Once you take out the wheels from the oven, then you must allow the wheels to rest at room temperature for some time.
There are multiple methods to test the curing on the wheel.
We will share some of the popularly used methods here.
MEK test is a commonly used method.
Here, a reagent called Methyl Ethyl Ketone is applied to the coated wheels.
If there is a color change in the coating, then it indicates that the coating on the wheel is not cured properly.
The color matching test is another method.
Here, the color on the coated wheel is compared with the color on the sample coated part.
If the color matches, then the curing is proper.
You can also use a gloss meter to check the curing on the wheel.
The gloss meter will give a reading based on the shine on the wheel.
This gloss meter reading must match with the reading on the sample coated workpiece.
You can make use of any of these methods to test the curing on the wheels.
15. Can You Explain The Working Of A Standard Powder Coating Oven For Wheels?
The working of a typical powder coating oven for wheels is given below.
You need to spray the wheels with coating powder first.
If the wheels are not clean, then you need to subject them to the pre-coating process also.
The spraying process will happen inside the coating booth.
After the successful completion of the spraying process, the wheels are taken into the powder coating oven for curing.
Once the wheels are placed inside the curing oven, the operator needs to set the various curing parameters in the control panel of the oven.
The curing temperature and the curing time are the two main parameters
These two values need to be set according to the powder manufacturer’s instructions.
The heating technique used by ovens will vary.
Some ovens use the direct heating method, and others use the indirect heating method.
The oven will take some time to reach the curing temperature.
This time is called bring-up time.
Once the oven hits the curing temperature, then it will stabilize the temperature at this value for the specified curing time.
The curing of the wheels will happen during this time.
You can add few more minutes to ensure that the coating on the wheels is not under cured.
Once the curing is complete, then you need to take the wheels out of the oven.
Keep the wheels at room temperature for some time.
Now, you will have fully powder-coated wheels.
16. What Is The Maximum Possible Curing Time For The Wheels?
The curing time of the wheel is dependent on the coating powder.
The curing time will vary for different types of powder.
You can refer to the powder manufacturer’s instructions to know the curing time for the powder.
It will usually be in the range of 20 to 30 minutes.
17. Does The Size Of The Powder Particles Affect The Coating Process For Wheels?
The powder particle size does affect the coating process for the wheels.
Many curing parameters will get affected by the change in powder size.
Some of the parameters include the flow rate of the powder particles, curing temperature, and curing time.
The flow rate will be more for a small powder particle size when compared with a larger particle size.
You can get a high gloss finish on the wheels with the help of small powder particles.
The texture of the coating will change with the powder size.
So, choose the particle size according to your design requirements.
18. Is It Safe To Use The Powder Coating Oven From Inovatec Machinery For Curing Wheels?
The powder coating oven from Inovatec machinery is entirely safe.
It will do no harm to the wheels if used in the right way.
You must stick to the instructions given in the manual of the coating oven.
Never deviate from these instructions.
All these instructions are simple and easy to execute.
The powder curing will cause no harm to the operator also.
19. What Are The Possible Reasons For Cracks In The Powder Coat On Wheels After The Curing Process?
The yield of the powder curing of the wheels will be affected by the cracks in the coating.
So, you must ensure that the cracks don’t occur in your curing process.
Cracks can occur in the powder coating on the wheels due to various reasons.
The possible causes for the cracks are given below.
The stability of the curing temperature is very important.
Once the oven touches the curing temperature, then it must be able to maintain this temperature for the set curing time.
If there is any stability issue, then cracks will happen on the coat,
A high-quality oven guarantees a stable curing temperature.
Inovatec machinery offers professional high-quality powder coating ovens to the customers.
So, there won’t be any curing temperature fluctuations.
When the flow of the powder is not proper, then cracks will occur.
It is mainly caused by lower curing time.
So, try to stick to the curing time mentioned by the powder manufacturer.
You can also add couple more minutes to this time.
A cheap quality powder will have poor flow characteristics.
So, try to avoid such powders.
Always use high-quality coating powders.
Some operators will think that the oven cycle time is the same as the curing time.
So, they will not take the bring-up time into account, which is a part of the oven cycle time.
It will result in a lower curing time for the wheels.
It will also lead to cracks because of under-curing.
The powder coating oven is a must if you are into a business that deals with the powder coating of wheels.
Wheels come in different sizes.
Our powder coating ovens are capable of curing all types of wheels.
Inovatec machinery makes use of the best quality raw materials to manufacture our powder coating ovens.
So, you can consider investing in our solution for powder coating.
Our coating solution includes the powder coating oven, powder coating booth, powder coating machine, and powder spray gun.