Inovatec Machinery Top Quality Solutions To Meet All Your Powder Coating Needs
We are in the manufacturing of powder coating gun parts for the past 10 years. We provide complete powder coating solutions to our customers. It includes the powder curing oven, powder coating gun, powder coating machine, and powder spray booth. Our strict quality process ensures that all our machines are of very high quality. You can buy from us with confidence.
- Provides training to vendors
- Attends all exhibitions that happen every 2 years
- Supports vendors in their promotion and advertising campaigns for our products
- Different customization options are available for all the devices.
The powder coating gun is responsible for spraying the powder coat on top of the part surface.
It comes with different nozzles.
The spray patterns can be varied by using different nozzles.
The powder coating booth helps to reduce powder wastage.
It helps to reuse the fallen powder particles.
It helps to ensure a better powder coat to the part.
The coated part needs to be cured to get the final finish.
It helps to provide the perfect temperature for the curing process.
You will get the best results with a high quality oven.
Best Quality Sand Blasting Machine For Pre-Coating
The surface of the part can be easily prepared for coating with the help of the sandblasting machine. The wet blasting process can be used for the pre-treatment. Here, the abrasives are mixed along with water and sprayed to the parts. The slurry pump is responsible for pushing this mixture on the part surface.
- The water ensures that the process is a dust free one.
- No color change will happen to the parts.
- Good for expensive parts that demand less material removal
- Low wear and tear for the parts due to less friction.
- High quality process
- Best quality raw materials
- Complete support to our customers
- Fully tested machine shipped to customers
Inovatec machinery provides a couple of choices for the power supply. There are 1110 V and 220 V power supplies available from Inovatec machinery. The selection of the power supply is fully dependent on your country. If your country provides 220 V power, then you need to select the 220 V power supply for the machine. You can mention your power supply choice while placing the order. It helps to avoid the use of an additional power converter device to switch the powers.
Both bulk orders and small orders are accepted by us. We use the sea shipping method for bulk orders. Small orders will be shipped through express shipping.
We have been shipping powder gun parts to more than 80 countries. We have a massive experience of 10 years in manufacturing and selling of powder coating gun parts. We pack all the machines as per international shipping standards. So, no damages will happen to the machine during the shipment. All the machines are fully tested before shipping. You can also come and inspect the machine at our facility before the shipment.
Inovatec machinery offers one year international warranty for the powder coating guns. So, if you need any spare part replacement during the warranty period, you can get it free of charge. Shipping charge is free during the warranty period. Once the warranty period expires, then we offer the spare parts for a basic cost. You don’t have to pay any shipping cost for the spare part during the warranty period
Money Gram, Bank Transfer, Western Union, and PayPal are the various payment modes supported by Inovatec machinery. We don’t accept payments made through credit cards.
Definitive Guide for Powder Coating Gun Parts
FAQ for Powder Coating Gun Parts
Are you looking for spare parts for your powder coating gun?
If yes, then you will find this guide really helpful.
You will learn about the different powder coating gun parts offered by Inovatec machinery.
Inovatec machinery is in the manufacturing and sales of powder coating solutions for the past 10 years.
We provide complete powder coating solutions to all our customers.
It includes the powder coating gun, powder coating machine, powder coating spray booth, and the powder curing oven.
- 1.What Are Powder Coating Gun Parts?
- 2.Is There Any Special Training Required For Assembling The Powder Coating Gun Parts?
- 3.What Is The Lead Time For Delivering The Powder Coating Gun Parts?
- 4.What Is The Life Of The Powder Coating Gun Parts?
- 5.Does The Powder Coating Gun Parts Come With Multiple Nozzles?
- 6.What Is The Cost Of The Powder Coating Gun Parts?
- 7.Which Are The Different Powder Coating Gun Parts Offered By Inovatec?
- 8.Is There Shipping Charges For The Powder Coating Gun Parts?
- 9.How Is The Support From Inovatec Machinery For The Powder Coating Gun Parts?
- 10.Is The Powder Coating Gun Parts As Good As The Actual Parts In The Machine?
- 11.What Are The Advantages of Using Powder Coating Gun Parts?
- 12.How Long Will These Powder Coating Gun Parts Last?
- 13.Is It Safe To Use The Powder Coating Gun Parts?
- 14.How To Replace The Existing Powder Gun PCB Board With A New One?
- 15.Is Part Number Required To Order The Powder Gun Parts?
- 16.What Are The Steps Taken By Inovatec Machinery That Ensure The Quality Of The Powder Coating Gun Parts?
- 17.How To Increase The Life Of The Powder Coating Gun Parts?
- 18.How To Place An Order For The Powder Coating Gun Parts?
- 19.How Often Should I Clean The Powder Coating Gun Parts?
- 20.How Often Should I Replace The Powder Gun Parts?
1. What Are Powder Coating Gun Parts?
The powder coating gun is the equipment used to powder spray the parts for the powder coating parts.
The powder coating gun parts are the parts of a powder coating gun.
There are many varieties of powder coating guns on the market.
Inovatec machinery manufactures high quality parts for the powder coating gun.
You can get the spare parts for all the powder coating guns from Inovatec and for some other brands powder coating guns too.
2. Is There Any Special Training Required For Assembling The Powder Coating Gun Parts?
There is no need for any special training to assemble the powder coating gun.
All the assembly instructions will be given along with the equipment.
You can follow these instructions to replace the bad part in the gun with a new part.
If you have any doubts regarding the replacement procedure, you can get in touch with our support team.
We will help you to disassemble or assemble the powder coating gun.
3. What Is The Lead Time For Delivering The Powder Coating Gun Parts?
The usual lead time will be around 15 days if we need to manufacture the part.
If we already have the part in stock then we can reduce the lead time.
You can get in touch with us to know more about the exact lead time for that particular part.
4. What Is The Life Of The Powder Coating Gun Parts?
We have designed the powder coating gun parts in such a way that they can work for a very long time without any issues.
The life of the part is mainly dependent on your usage.
If you use the powder coating gun heavily, then the life of the parts will come down.
5. Does The Powder Coating Gun Parts Come With Multiple Nozzles?
Inovatec machinery offers all types of nozzles along with the powder coating gun parts.
So, if you need any particular type of nozzle for any of the powder coating guns, you can contact us.
We will get you the replacement nozzle.
You can purchase a single nozzle as well as multiple nozzles, according to your requirement.
6. What Is The Cost Of The Powder Coating Gun Parts?
The cost is different for different parts.
You can contact us with the exact part details that you want to purchase.
We will share the exact cost for those parts.
If you are looking for a part replacement within the warranty period, then you can get the parts for free.
We will pay the shipping charges also for the parts during the warranty period.
7. Which Are The Different Powder Coating Gun Parts Offered By Inovatec?
Inovatec machinery offers a wide variety of powder coating gun parts for the customers.
All these powder coating gun parts offered by the Inovatec are of very high quality.
So, you can buy from us with confidence.
You can contact us for any queries.
The parts are listed below
7.1 Gema Powder Coating Gun Parts
Gema powder coating gun parts that need a replacement can be bought from Inovatec.
Any of the parts of the Gema coating gun can be ordered from us.
7.2 Wagner Powder Coating Gun Parts
All the spare parts of the Wagner powder coating gun can be bought from us.
We offer high-quality spare parts for the Wagner coating guns.
7.3 Parker Ionics Powder Coating Gun Parts
If you are using a Parker Ionics powder coating gun, then you can source the parts for this coating gun from us.
All the parts are of very good quality.
7.4 Nordson Powder Coating Gun Parts
The Nordson powder coating gun parts can be sourced from us if any of the parts in your Nordson coating gun has gone bad.
7.5 KCI Powder Coating Gun Parts
Different parts of the KCI powder coating gun that include the nozzle, valves, cover, etc can be purchased from us.
7.6 Sames Powder Coating Gun Parts
We also offer all the spray gun parts for the Sames powder coating gun.
7.7 Powder Spray Nozzle
The powder spray nozzle is responsible for the multiple spray patterns.
Different powder nozzles support different powder sizes.
So, if any of your powder nozzles has gone bad, you can get the replacement nozzle part from us.
7.8 Powder Coating Gun Cascade
The powder coating gun cascade is another critical part of the powder coating gun.
You can purchase the replacement part from us if your part has gone faulty.
7.9 Powder Gun Pump
The powder gun pump is also susceptible to wear and tear after prolonged use.
So, you can get the replacement part in case of any issues.
7.10 Powder Gun Sleeve
The powder gun sleeve offers the perfect sealing of the powder coating gun.
When you disassemble the powder coating gun, it is recommended to use a new powder gun sleeve for better protection.
7.11 Powder Hose
The powder hose helps to move the powder particles from the storage area to the powder coating gun.
The constant movement of the powder will cause cracks in the powder hose after a long time.
You can get the replacement powder hose from us.
7.12 Powder Gun PCB Board
If the electronics in your powder coating gun from Inovatec has gone bad, then you need to replace it with a new one.
You can order the powder gun PCB board from us.
You can easily install the new one on the powder coating gun.
It will make the powder coating gun functional again.
8. Is There Shipping Charges For The Powder Coating Gun Parts?
If the ordered part is a replacement part for an existing powder coating gun ordered from Inovatec machinery that is under the warranty period, then there will be no shipping charges
The spare part also will be free of charge during the warranty period.
If it is after the warranty period or if you are a customer looking to order few parts of the powder coating gun, then you will have to pay the shipping charges also.
9. How Is The Support From Inovatec Machinery For The Powder Coating Gun Parts?
We offer complete support for the powder coating gun parts.
All the powder coating gun parts come with one year international warranty.
So, if any of the parts go bad you can get the replacement part for free.
The shipping charge is also waived off for the replacement part.
You can contact us for any kind of support in troubleshooting the device or any other technical support.
We are happy to help.
10. Is The Powder Coating Gun Parts As Good As The Actual Parts In The Machine?
The spare parts that we provide are of the same quality as the actual parts in the powder coating gun.
So, you will get the same experience and performance as the actual powder coating gun with the replacement part.
11. What Are The Advantages of Using Powder Coating Gun Parts?
There are many advantages of using powder coating gun parts.
They are listed below.
11.1 Cost-effective option
The option to purchase the powder coating gun parts makes it possible to reuse the powder coating gun even after a part failure.
So, you don’t have to spend on a new powder coating gun when some of the parts fail.
You can easily get the replacement spare part from us.
The replacement part will be free in the warranty period.
It will come at a basic price after the warranty period.
So, for a small cost, you can make the powder coating gun fully operational again.
So, it is a completely cost-effective option.
11.2 Perfect Finish
We use high-quality raw materials to manufacture the powder coating gun parts.
So, you will get the replacement part with the same quality as that of the original.
So, you will get the same perfect finish using the replacement part.
So, there will no loss in the quality of the finish provided by the powder coating gun.
11.3 Less material wastage
If the powder coating gun parts are not available, then you will have to dump the powder coating gun when any of the parts fail.
So, there will be more equipment material wastage.
This wastage is avoided by replacing the failed part with a new one of the same quality.
12. How Long Will These Powder Coating Gun Parts Last?
We use very high quality raw materials to manufacture the powder coating gun parts.
We source all the raw materials from certified vendors.
All the raw materials are further subjected to certain quality tests.
Only those materials that pass the test are passed on to the manufacturing stage.
We follow the strict quality process in our manufacturing unit.
Thus, we guarantee very high quality powder coating gun parts.
So, you can use these parts for many years without any issues.
13. Is It Safe To Use The Powder Coating Gun Parts?
It is completely safe to use the powder coating gun parts.
It does not cause any harm to the user when you use it in the powder coating gun.
You need to follow the correct assembly instructions to ensure that the part is fitted on the coating gun correctly.
14. How To Replace The Existing Powder Gun PCB Board With A New One?
You can check the user manual to know the exact location of the powder Gun PCB inside the powder coating spray gun.
You can disassemble the spray gun to take out the old PCB.
You can place the new PCB in that place and reassemble the powder coating gun.
15. Is Part Number Required To Order The Powder Gun Parts?
It is not necessary to know the part number to order the powder coating gun parts.
But certain parts will have the part number marking in them that you can share.
You can also share the picture of the part that you want to order.
We will get it for you.
16. What Are The Steps Taken By Inovatec Machinery That Ensure The Quality Of The Powder Coating Gun Parts?
All the powder coating gun parts from Inovatec machinery are of very high quality.
We have taken many steps to ensure high quality for the parts of the powder coating gun.
We maintain a list of certified vendors.
All the raw materials for manufacturing the parts are sourced from these vendors.
All the production activities of the parts take place under the strict supervision of our engineers.
We have a team of highly experienced and certified engineers.
All the parts for the powder coating gun manufactured at our facility are further tested to ensure that they function as per the design.
17. How To Increase The Life Of The Powder Coating Gun Parts?
There are numerous ways by which you can increase the life of the powder coating gun parts.
17.1 Machine Load
You must ensure that the powder coating gun is not loaded heavily with powder.
If you load the coating gun with more powder particles, then it will be under heavy stress and the life of the parts in the gun will come down.
17.2 Power source stability
Your powder coating gun will be working in 110 V or 220 V.
Whatever be the operating voltage specification, you must ensure that your power source is a stable one.
If there are too many fluctuations in power, then the electrical components in the PCB will be under heavy stress.
So, they will start to fail before their actual life time and you will have to order the replacement.
17.3 Proper maintenance of the gun
The proper and regular maintenance of the powder coating gun is very important.
The life of the various parts in the gun will come down if you fail to do the maintenance.
The weak and bad parts of a powder coating gun can be easily identified during the maintenance activity.
If you replace these parts at the correct times, then you can ensure that other good parts in the machine do not fail because of these faulty parts.
So, don’t skip the maintenance activities of the powder coating gun.
17.4 Air quality
The compressed air that is fed into the powder coating gun must be of good quality.
The contamination level of the air must be within acceptable limits.
The air will get contaminated by the presence of oil and water in the environment.
So, you cannot feed raw air directly to the compressor.
The air needs to be filtered to remove the contaminants.
You must ensure that the air quality is always at the mentioned level.
It will help to improve the life of the powder coating gun.
17.5 Usage of the powder coating gun
Some powder coating jobs demand long duration continuous use of the powder coating gun.
You will be putting the powder coating gun under stress if you use it continuously for a very long time.
So, try to give some breaks between.
It will help to reduce stress.
You must also ensure to follow the instructions given in the powder coating gun’s user manual to ensure a long life for the coating gun.
17.6 Cleaning the powder hose
The regular movement of the powder particles through the powder hose can damage the powder hose over time.
You must clean the powder hose regularly to ensure that there are no leftover particles stuck inside the powder hose.
It can result in the accumulation of the powder in the powder hose in the upcoming coating cycles.
Thus, it may result in the wear and tear of the powder hose.
So, clean it properly to ensure a long life for the powder hose.
18. How To Place An Order For The Powder Coating Gun Parts?
It is easy to place an order for the powder coating gun parts.
You can either order a single part or multiple parts.
You can click on the “Request an Instant Quote” button provided on the webpage.
A new window will pop up.
You can enter your part requirements in this window and submit them.
We will respond with the quote.
If you are purchasing lots of parts, then you need to pay some amount in advance.
We will start manufacturing the parts only after receiving the advance amount.
The balance amount can be paid before the shipment of the parts.
19. How Often Should I Clean The Powder Coating Gun Parts?
The powder coating gun parts will automatically get cleaned along with the powder coating gun, once you install the part on the device.
The gun must be cleaned properly before every color change.
You must do a deep cleaning of the gun by purging it at the end of the day’s process.
You can also clean during the maintenance works.
You must double check and ensure that there are no water droplets inside the gun before storage.
Any presence of water will affect the quality of the coating.
20. How Often Should I Replace The Powder Gun Parts?
You need to replace the powder coating gun parts when the part goes bad or weak.
Frequent use of the powder coating gun can put many of the parts in the gun under stress.
Thus, wear and tear will start happening to the parts.
So, a replacement will be necessary.
Now, you know the different powder coating gun parts offered by Inovatec machinery.
So, get your replacement parts at the right time to ensure that your powder coating process runs efficiently.
It is a good idea to stock some spare parts if you are using the powder coating gun frequently.
We not only offer powder coating gun parts but also offer the complete powder coating solution for your business.
It includes the powder curing oven, dedicated powder spray booth, powder coating machine, and the powder spray gun.
You can contact us any time.
We will help you to choose the right machine for your powder coating needs.