Powder Coating Conveyor System Perfect for Small Jobs & Hobbist
Best Quality Powder Coating Conveyor System Manufacturer From China
  • Provides conveyor accessories also
  • Offers track, chain, tension, drive unit, lubrication oil cup, hanger, etc.
  • Good after sales support
  • High quality Powder Coating Conveyor System systems.
GETan Instant Quote

Inovatec Machinery Delivering High Quality Powder Coating Conveyor Systems That Meet All Your Powder Coating Needs

An overhead conveyor system is the most commonly used solution for wet paint or powder coating finishing. The type of conveyor selected for your operation will depend on the weight, size. We can design a whole conveyor system especially for your needs

The powder coating conveyor system can be utilized by both the powder painting process as well as the wet painting process. The selection of the conveyor system is based on the size and weight of the parts. We are in the manufacturing of powder coating conveyor systems for around 10 years. We provide the full powder coating conveyor system as well as different parts of the conveyor system.

 

Light Weight Overhead Conveyor System

 

  • Good for loads less than 100 kg
  • Low noise conveyor that is easy to install and maintain
  • Supports high-temperature curing operations and is resistant to chemicals.

 

X348 X458 X678 I Beam Heavy-duty Conveyor System

 

  • Suitable for parts that are above 100 kg and below 500 kg
  • High carbon steel used for the preparation of the rivetless chain
Light Weight Overhead Conveyor System

The Light Weight overhead conveyor system is useful for powder coating and wet painting small and medium size parts. Frequent color changes are possible in this system.

Heavy-duty I Beam Conveyor System

If the parts weigh above 100kg then the I Beam heavy-duty conveyor system is the best choice

Related Accessories

The I-beam system is typically applied for systems that handle parts weighing 100 kg to 500 kg.

It makes use of rivetless chains that are drop-forged from high strength carbon steel.

Inovatec supply the whole system as well as separate parts.

The trolley is used in the I-beam system that handles the heavy parts.

You can purchase the trolley alone or the entire conveyor system.

The chain is used in the I-beam conveyor system.

It is capable of handle wights up to 500 kg.

You can buy the chain alone or the full I-beam conveyor system.

The powder coating conveyor drive unit is responsible for the movement of parts across the line.

We offer the best quality conveyor drive units

A high quality drive system will ensure an efficient process.

If you are looking to hang parts then we offer the X type hangers and the Y type hangers.

They are made of high quality carbon steel 

We also offer the tension part to our customers.

The straight track comes with a standard size of 3000mm. 

You can combine many such tracks to get the desired length.

The QXG Series conveyor chain helps to hold the parts and move them in the powder coating conveyor systems.

The powder coating oil lubrication cup helps to provide the necessary lubrication for the proper movement of the hangers.

The powder coating curved track ensures smooth movement of the parts across the conveyor line.

The powder coating conveyor system comes with a complete conveyor system.

U type Hanger: It is best suited for parts that require manual rotating and for low position parts.

Y Type Hanger: It is an easy-to-install hanger then is connected to the chain directly. A cross-type hanger or a cross disc type hanger is connected at the end of this hanger.

Cross Disc Type Hanger: This hanger is almost similar to the cross-type hanger. But, it contains an additional disc above the hook. The disc is used to hold the dirt or oil that pollutes the parts.

Cross-Type Hanger: A Y-type hanger is needed along with this hanger. This hanger will make the suspended parts rotate 90 degrees.

Top Quality Sand Blasting Machine For Pre-Coating

The pre-treatment of the parts can be done using the sandblasting machine. The pre-treatment process helps to prepare the parts for the powder coating process. The water blasting technique is the commonly employed technique by most businesses. The abrasives are blasted into the part surface along with water. Here, there won’t be any dust involved in the process. The water helps to remove the dust particles. The slurry pump is responsible for pumping the abrasives and the water mixture to the parts.

 

  • No visible color change for expensive parts.
  • Low friction effect helps in reducing the wear and tear of workpieces
  • Dustless process because of the presence of water
  • No damage will happen to the parts because of this process
Inovatec Machinery- Best Quality Powder Coating Conveyor System Manufacturer from China
  • Support from experienced and certified engineers
  • Top quality powder coating conveyor systems
  • Different customization options for the customers
  • The high quality process employed for manufacturing
Frequently Asked Question
What is the delivery mode for the Powder Coating Conveyor System?

You can order the different parts as well as the full conveyor system. If it is a bulk order, then we will ship it via sea. If the order is a small one, then we will use the express shipping service.

Do Inovatec machinery give a choice for power supply for the Powder Coating Conveyor Systems?

There are a couple of choices provided by Inovatec machinery when it comes to the power supply. This choice helps to avoid the usage of an additional power converter for converting the voltages. The customer can select the 220 V power supply if his/her country supports the 220 V power grid. The choice can be 110 V supply if the power at your location is 110 V grid. You need to mention your choice while placing the order.

Is it safe to place an order for a powder coating conveyor system from Inovatec?

It is completely safe to order the powder coating conveyor system from Inovatec machinery. We have been shipping our conveyor systems to different parts of the world. We have got distributors in most of the countries. You can either order a full system or different parts. We pack the systems as per the international packing standard. So, all the parts and the machines shipped will be received in the best condition. The customer can also come and inspect the equipment at our facility before shipment.

What are the warranty terms for the Powder Coating Conveyor System?

The powder coating conveyor system from Inovatec machinery comes with one year warranty. If any of the parts go bad during this one year period, then we will provide it free of cost. It. Includes the shipping charges also. If you need a replacement part after the warranty period, then you can get it from us for a basic price. We provide full support to the machine for its entire lifetime. You can contact us any time for troubleshooting any issues with the system.

Can you share the various payment options supported by Inovatec Machinery?

Bank Transfer Western Union, PayPal, and Money Gram are the various payment modes supported by Inovatec machinery. We don’t accept any payments done via credit card.

FAQ for Powder Coating Conveyor System Frequently Asked Questions

Are you looking for a powder coating conveyor system?

If yes, then you should get to know the various benefits of using them.

It will help you to select the right system based on your coating requirements.

There is two different powder coating conveyor system from Inovatec machinery.

You can select any of these according to your requirements.

The different powder coating solutions offered by Inovatec machinery include the powder coating gun, powder coating machine, powder spray booth, and powder curing oven.

The powder coating conveyor system from Inovatec is useful for both powder coating as well as for paint coating.

 

1. What Is A Powder Coating Conveyor System?

A powder coating conveyor system is s system that is used for powder coating or wet painting parts in the industry.

Inovatec offers 2 types of powder coating conveyor systems for the customers.

These are some of the best powder coating conveyor systems in the market.

Some of these are capable of handling small and medium size parts.

There are models that can handle large size parts.

You can choose any of these systems based on your needs.

A typical powder coating conveyor system will have a powder spray booth, powder coating machine, powder spray gun, powder curing oven, and a conveyor system.

powder coating oven outside

 

2. How Long Will These Powder Coating Conveyor Systems Last?

The powder coating conveyor system is designed to work for many years without any issues.

We use high quality raw materials for the manufacturing of the powder coating conveyor system.

All the manufacturing activities will be done under the strict guidance of our experienced engineers.

We use the best quality raw materials for the manufacturing of the powder coating conveyor system, sourced from certified vendors.

So, the powder coating conveyor system will last for a very long time.

powder coating procedure

 

3. Is It Safe To Use The Powder Coating Conveyor System?

The powder coating conveyor system is completely safe for the user.

This system will not harm the user if you use it in the right manner.

You must follow the instructions given in the operating manual.

powder coating process copy

 

4. What Is The Life Of The Powder Coating Conveyor System?

The powder coating conveyor system’s life is mainly dependant on its usage.

If you use the system very frequently, then life will be less.

You must also ensure that all the maintenance activities are done at the right time.

It is designed to work for many years.

So, high life is guaranteed with the Inovatec machines if you use them in the right way.

powder coating with spray gun

 

5. Is There Any Special Training Required For Assembling The Powder Coating Conveyor System?

You don’t need to undergo any special training to assemble the powder coating conveyor system.

All the instructions needed for the assembly of the powder coating conveyor system will be given in the manual.

There are no complex assembly instructions.

You can follow the manual and assemble the system.

If you have any doubts regarding the installation, you can get in touch with our team.

powder coating set up

 

6. What Are The Benefits of Using Powder Coating Conveyor System?

The benefits of using a powder coating conveyor system are many.

They are listed below.

powder coating setup

 

6.1 Lower the part damage

When the parts are handled by the operator, then the chances of the parts getting damaged are more.

You can avoid these manhandling damages if you make use of a powder coating conveyor system.

The workpieces are hanged onto the conveyor.

So, there won’t be any manhandling of parts during the process.

So, the damages are reduced.

 

6.2 Easy to maintain

All the powder coating conveyor systems from Inovatec machinery come with easy maintenance works.

You can find all the maintenance jobs in the operating manual.

No special tool or investment in training is required for machine maintenance.

 

6.3 Saves a good amount of time

You can save a good amount of time if you use the powder coating conveyor system.

The movement of parts from one location for different processes can result in a wastage of time.

This system helps to save all those times.

So, more parts can be coated or painted in less amount of time.

 

6.4 Cost effective solution

You will have to invest in additional laborers to move the big parts if you don’t use a powder coating conveyor system.

You can avoid these labor charges with the help of the right conveyor system.

A one time investment will be need on the powder coating conveyor system.

But the system will prove a cost effective solution in the long run.

 

6.5 Efficient movement of parts

The powder coating conveyor system is very useful for moving the parts, both large and small, from one process to another.

There won’t be any wastage of time if you use this system.

 

6.6 Uniform and Consistent finish

The finish will be consistent across all the parts if you use a powder coating conveyor system.

The human intervention will be less in the case of this system.

So, there won’t be any difference in the part finishes.

You will get a uniform coating on all parts.

 

7. What Are The Typical Applications Of The Powder Coating Conveyor System?

There are different types of applications for powder coating conveyor systems.

They are given below.

powder coating spray

 

7.1 Coating Medical Parts

All medical parts, both large and medium size parts can be easily coated using this technique.

 

7.2 Die-cast parts coating

The powder coating conveyor system is very effective in powder coating die-cast parts.

 

7.3 Coating of Electronic parts

Big electronics parts can be powder coated in large batches using the powder coating conveyor system.

 

7.4 Coating Architecture parts

Architectural parts will find the powder coating conveyor system cost effective for their business.

7.5 Coating of Metallic Cookware Parts

The powder coating of a huge number of metal cookware parts can be easily done using this system.

 

7.6 Coating of Mechanical Parts 

You can easily coat large batches of mechanical parts using the powder coating conveyor system.

 

7.7 Coating of Metallic Furniture Parts

When the number of metallic furniture parts is huge, then the powder coating conveyor system is the best choice for coating.

 

7.8 Coating of Defense parts

The powder coating conveyor system is capable of coating both large and small defense parts in less amount of time.

 

7.9 Coating of Automotive Parts

All automotive parts can be coated or painted efficiently using this system.

8. Can You Explain The Working Of The Powder Coating Conveyor Line?

The powder coating conveyor system for a typical powder coating process consists of the pre-treatment stage, powder coating gun, powder spray booth, reciprocator, powder curing oven, and the powder sieve machine.

The parts that are to be coated are hanged in the hangers.

The conveyor is programmed to move the parts at a predefined time.

So, the parts will be first moved to the pre-treatment section.

A sand blasting machine is a commonly used machine for the pre-treatment process.

Here, the surface cleaning of the parts will be done.

After completing this process, the parts are further moved to the powder spray booth.

Here, the charged powder particles will be sprayed on the parts.

powder coating system

 

The powder particles will get attracted to the part because of the electrostatic force and will get deposited there.

Next, it will move to the powder curing oven.

Here, the parts will be soaked in very high temperatures.

The dwelling time and the soaking temperature will be different for different parts.

You will get the final coated part as the output of the process.

This is the typical working of a powder coating conveyor system.

 

9. What Is The Cost Of The Powder Coating Conveyor System?

Inovatec machinery manufactures and sells two different types of powder coating conveyor systems.

So, the cost will vary with the models.

Inovatec also allows the customization of the powder coating conveyor system.

The cost will increase when you add more features with these customizations.

You can get in touch with us to know the cost for the different machine models.

powder coating systems

 

10. Can You Share The Typical Maintenance Activities On The Powder Coating Conveyor System?

All the powder coating conveyor systems from Inovatec machinery are easy to maintain machines.

You don’t need to invest in any special toolkit or training for the maintenance activity.

There are different models of the powder coating conveyor system.

So, the maintenance activity will vary for each of these machines.

But there is some maintenance activity that will be common to all the machines.

They are given below.

powder coating systems

 

10.1 Part replacement

The parts that have gone bad neds to be replaced immediately.

You can get the replacement parts from us.

Make sure that you run the system with healthy parts.

If you run the machine with bad parts, then it will affect the life of the other parts also.

 

10.2 Visual inspection

Visual inspection is the best method to identify the weak parts in the powder coating conveyor system.

Wear and tear can happen to the parts in the powder coating conveyor system in a long run.

 

10.3 Greasing and Cleaning

You need to do proper cleaning of the powder coating conveyor system during the maintenance time.

Proper greasing also needs to be done for the smooth movement of parts through the conveyor.

It will ensure the proper working of the system.

 

11. Is There Shipping Charges For The Powder Coating Conveyor System?

There will be shipping charges for the powder coating conveyor system.

The customer will have to bear the shipping costs.

The shipping cost will vary with the destination countries.

powder coating with spray gun

 

12. Does Inovatec Machinery Offer Power Supply Options For The Powder Coating Conveyor System?

Inovatec Machinery does offer power supply options for the powder coating conveyor system for the customers.

There are two options for the power supply.

They are the 220 V power supply and the 110 V power supply.

The customer can select any of these while placing the order.

If you live in a country that provides 110 V power, then go ahead and select the 110 V power supply.

If your country supports the 220 V power, then go for the 220 V power supply option.

It allows you to use the machine directly without using a power converting device in between.

powder coating work

 

13. Which Are The Different Powder Coating Conveyor System Offered By Inovatec?

Inovatec machinery manufactures two types of powder coating conveyor systems.

You can select any of these powder coating conveyor systems based on your powder coating requirements.

coating metal with powder

 

13.1 Light Weight Overhead Conveyor System

If you are looking for a conveyor system that can handle small and medium size parts, then you must consider investing in the Light weight overhead conveyor system from Inovatec.

It is capable of handling part size up to 100 kg.

You can get frequent part color changes with this system.

They are easy to install and make very little noise.

 

13.2 Heavy Duty I-beam Conveyor System

If you are looking for a system that can handle big size parts, then the Heavy duty I-beam conveyor system is for you.

It is capable of handling parts in the weight range of 100 kg to 500 kg.

High carbon steel is used for the manufacturing of the rivetless chains in the conveyor.

It helps to handle the heavy loads in the system.

 

14. What Is The Lead Time For Delivering The Powder Coating Conveyor System?

The usual lead time for the powder coating conveyor system is 15 days.

The time can vary depending on the order quantity.

We will start the manufacturing of the powder coating conveyor system after receiving the advance payment amount.

We will inform you once the machine is fully built.

You can pay the balance amount before shipping the system.

If you are ordering any parts of the system, then the lead time will be more or less the same.

If you are interested to reduce the lead time, you can discuss it with our engineers.

person spraying powder coating

 

15. Does Inovatec Machinery Support Customization Of The Powder Coating Conveyor Systems?

Inovatec machinery supports customizations of the powder coating conveyor system.

You can check with our support team to know the various customization options available for the different powder coating conveyor systems.

powder coated parts

 

16. How To Increase The Life Of The Powder Coating Conveyor System?

There are many ways to increase the life of the powder coating conveyor system.

These methods are listed below.

powder coater machine

 

16.1 Load in the machine

You must never overload the conveyor system.

If your parts weigh more than 100 kg, then you must use the heavy duty I-beam conveyor system.

The lightweight conveyor system is not designed to handle weight above 100 kg.

So, if you use this system for parts above 100kg, then its life will come down drastically.

 

16.2 Power source stability

The power that you feed to the powder coating conveyor system must be free from fluctuations.

If there are too many power fluctuations, then the electronic parts of the machine will be under stress and it will start to fail.

So, feed fluctuation-free power to the system.

 

16.3 Usage of the conveyor system

All the instructions required to operate the powder coating conveyor system are given clearly in the instruction manual.

You must not alter these instructions.

For a long duration process, it is recommended to take some breaks between.

It will help to reduce the stress on the system.

Thus, life will increase.

 

16.4 System Maintenance

The bad and the weak parts in the system can be easily located during the maintenance of the machine.

So, do regular and proper machine maintenance.

It is very useful in enhancing the life of the system.

 

16.5 Part replacements

whatever parts are identified as bad, you need to replace them with new ones.

If you continue to run the system with bad defective parts, then it will affect the life of other parts in the system too.

So, replace the bad parts immediately.

You can purchase the new parts from Inovatec.

 

17. How Is The Support From Inovatec Machinery For The Powder Coating Conveyor System After Sales?

Inovatec machinery provides complete support to our customers after the sale also.

Once the machine reaches your location, you can contact us to guide you in assembling the machine.

We offer one year warranty for the powder coating conveyor system.

So, if any of the parts in the powder coating conveyor system has gone bad during this one year period, then you can contact us for the replacement.

You will get the replacement part for free during the warranty period.

We will charge a basic price for the spare parts after the warranty period.

We will ship the part for free during the warranty period.

We will provide full support to the powder coating conveyor system during its entire lifetime.

Customers can contact our engineers for any kind of troubleshooting.

We are always happy to help.

powder coating full procedure

 

18. How To Place An Order For The Powder Coating Conveyor System?

The customer can easily place an order for the powder coating conveyor system on our user friendly website.

You can order the full powder coating conveyor system as well as the individual parts of the system.

The customer can click on the “Request an Instant Quote” button provided on the website to place the order.

You need to fill in the details in the popup window and submit it.

We will get back to you with the quote.

We will start the production of the powder coating conveyor system after receiving the advance amount.

The balance amount can be paid any time before shipping the machine.

powder coating in progress

 

19. How Often Should I Clean The Powder Coating Conveyor System?

You must clean the powder coating conveyor system on a regular basis.

When you have completed the day’s work, you can clean the system.

Deep cleaning of the powder coating conveyor system is needed during the maintenance time.

The cleaning instructions and the type of cleaning agents to use are clearly given in the operating manual.

If you have any queries regarding the cleaning procedure, feel free to contact us.

powder coating in spray booth

 

20. Does Powder Coating Conveyor Lines Help To Improve The Efficiency Of The Process?

The efficiency of the powder coating or the painting process can be improved with the help of the powder coating conveyor system.

The different ways by which the system helps to improve the process efficiency are given below.

powder coating line system

 

20.1 Process acceleration

The process of moving the parts to different locations for different processes will be a time consuming one.

The powder coating conveyor system helps to avoid this shifting of parts.

The parts will be hanged in the conveyor and they will move to different process stages as per the programming.

So, the coating process can be done much faster.

 

20.2 Supports multiple part sizes and weights

Inovatec machinery offers two models of the powder coating conveyor system.

One mode supports weights up to 100 kg and the other model supports weights from 100 kg to 500 kg.

So, the system is capable of supporting multiple part sizes and weights.

Thus, you can use the same system to coat multiple types of parts.

So, a one time investment in the system is really worthy.

 

20.3 Uniform and Perfect finish

The time allotted for the different processes can be programmed.

It will ensure that all the parts receive the same quality finish.

So, there will be uniformity in the finish of the parts.

 

21. Which Conveyor System Is The Best For Your Application?

Both the conveyor systems offered by the Inovatec machinery are equally good.

The choice of system will depend on your requirement.

If your parts weigh less than 100 kg, then the Light weight head conveyor system will be the best choice.

If your business deal with powder coating or painting of heavy parts, then you must invest in the Heavy duty I-beam conveyor system.

It can handle weights up to 500 kg.

powder coating line

 

22. Is The Powder Coating Conveyor Lines from Inovatec Capable Of Handling Very Large Parts?

The heavy duty I-beam conveyor system from Inovatec machinery is designed to handle parts in the weight range of 100 kg to 500 kg.

So, you can invest in this system if you are having very large size parts.

powder coating metal work peices

 

23. What Steps Are Taken By Inovatec Machinery To Ensure The Quality Of The Powder Coating Conveyor System?

Inovatec machinery always guarantees high quality powder coating conveyor systems to the customers.

We have taken many measures to guarantee high quality machines.

We procure all the raw materials for the production of the powder coating conveyor system from reputed and certified vendors.

We maintain a list of vendors for procurement of raw materials.

All the sourced raw materials are further subjected to quality testing.

powder coating on metals

 

If the raw material gets failed in this quality test, then it will not be passed on for production.

We have a team of certified and experienced engineers at our production house.

All the production activities for the powder coating conveyor system are strictly monitored by these engineers.

We ensure that the machine is fully working as per the design after the manufacturing process.

The customer is allowed to come to our facility for checking the powder coating conveyor system after production.

We pack the powder coating conveyor system as per the international packing standards.

It will ensure that the machine reaches your place safely without any damages.

 

24. Which Are The Different Powder Coating Conveyor Rotating Hangers Offered By Inovatec Machinery?

Inovatec machinery offers 5 types of hangers for their conveyor systems.

They are listed below.

powder coating on multiple parts

 

24.1 X Type Hanger

X type hangers are one of the commonly used hangers and they will be in the “X” shape.

It is made of durable carbon steel of very high strength.

 

24.2 Y Type Hanger

The Y type hanger is connected to the chain directly.

It is an easy to install hanger.

You need to connect a cross type hanger or a cross disc type hanger to the other end of the Y type hanger.

 

24.3 U Type Hanger

If you are planning to rotate parts manually, then the U type hanger will be the best choice.

It also allows low positioning of parts.

 

24.4 Cross Type Hanger

You need to use the cross type hanger along with the Y type hanger.

You can make the parts rotate 90 degrees with the help of this hanger.

 

24.5 Cross Disc Type Hanger

The cross disc type hanger also require a Y type hanger along with it.

It is more or less similar to the cross type hanger.

It will have an extra disc above the hook.

The disc is useful for the collection of dirt and oil that pollutes the parts.

 

25. Do Inovatec Machinery Provide Both Straight Track As Well As Curved Track For The Powder Coating Conveyor Systems?

Bot, straight as well as curved tracks are required in a powder coating conveyor system.

So, we manufacture and sell both curved and straight tracks.

powder coating work

 

26. Is It Possible To Purchase Individual Parts Of The Powder Coating Conveyor System Separately?

The customer can either order the full set or individual parts of the powder coating conveyor system.

You can contact us to know the pricing for the individual parts

powder spray booth from outside

 

Conclusion

Inovatec offers powder coating conveyor systems that are capable of powder coating or painting both large size parts and small size parts.

So, if your business deals with large or small parts, you can definitely consider this option.

It will help you to take your business to new heights.

Inovatec machinery is known for its powder coating solutions.

We offer different powder coating machines.

It includes the powder coating gun, powder spray booth, and powder curing oven also.

The advantages of using a powder coating conveyor system are many.

It will definitely help you to run an efficient coating process.

 

Send Your Inquiry Today
Scroll to Top