Best Quality Batch Powder Coating Oven Manufacturer From China
GETan Instant Quote

Inovatec Machinery Delivering High Quality Batch Powder Coating Ovens For Customers

The batch powder coating ovens from Inovatec machinery are some of the best in the market. The high-quality raw materials used in the production of the batch ovens make them highly reliable. We also offer other powder coating machines, conveyor lines, powder coating guns, powder coating machines, and powder spray booths. All these powder coating solutions from Inovatec support various levels of customization. These customizations will help businesses to improve their productivity. Our distributors are located in various parts of the world. You can procure our machines through our distributors or directly from us.

High-Temperature Industrial Curing Oven

If you are looking for an industrial oven that is capable of handling high curing temperatures, then this oven is for you. It is the best choice for curing industrial parts.

Conveyor Powder Coating Oven

If you plan to implement conveyor lines for the part movement, then the conveyor powder coating oven is for you. It helps to remove the dependency on human laborers for the movement of workpieces.

Diesel Fired Powder Coating Curing Oven

If your choice of fuel for heating the oven is diesel, then the diesel-fired oven is for you. You can invest in this oven of diesel proves cost-effective to you.

Gas Powder Coating Batch Oven

It is one of the most popular powder coating batch ovens from Inovatec. Gas is used as the heating fuel in this oven.

Electric Powder Coating Batch Oven

If you are looking for a curing oven with fast ramp-up rates, then you can consider investing in the electric powder coating batch oven. It supports wide range of curing temperatures.

KL-1645 Big Electric Powder Coating Oven

If you are looking to invest in an oven for large parts, then the KL-1645 coating oven is for you. It uses electricity for heating the chamber.

KL-1688 Small Powder Coating Oven

If your business deal with the powder coating of small parts, then the KL-1688 model oven is for you. It will help to cure multiple parts at a time.

KL-1732 Electric Powder Coating Batch Oven

The KL-1732 oven is powered by electricity. This batch processing oven will help you to lower the oven cycle time.

KL-1864 Electric Powder Coating Oven

The KL-1864 curing oven uses electricity for heating the chamber. It uses the direct heating technique for curing parts.

LPG Gas Powder Coating Oven

The LPG gas curing ovens are one of the preferred choices of ovens for many businesses. In addition, the fact that LPG is cheaper than other fuels makes it a popular choice among customers.

KL-1732 Electric Powder Coating Batch Oven

If you are looking to hang parts in the chamber, then the top track feature in this powder coating oven will be very useful. In addition, it comes with good efficiency.

Small Batch Powder Coating Gas Oven

If you are looking to cure small parts, then this gas-powered powder coating oven is a good choice. It is recommended for small industries.

Tunnel powder coating oven

The tunnel type curing oven occupies a large space. It is used by systems that make use of the conveyor lines for moving parts. In addition, it can be used in automated powder coating solutions.

Gas/Diesel Powder Coating Large Oven

This oven supports both diesel as well as gas for heating the oven. So, if you prefer these two fuels, then you can invest in this curing oven.

Related Product

There are many types of powder spraying guns from Inovatec machinery. 

All these powder coating guns come with multiple nozzles.

These nozzles ensure that you can use multiple powder sizes with the same gun.

It also allows you to change the pattern of the powder spray.

The powder coating booth provides the right kind of ambient environment for the powder spraying process.

It ensures that no contamination happens to the powder spray falling on top of the workpieces.

The humidity and the temperature inside the booth are controlled with the help of the exhaust fans.

The operator needs to use the control panel provided in the powder coating machine to input various coating parameters. 

The digital controls in the machine help to provide a precise setting of each of the parameters.

Different parameters like the flow of powder into the powder spray gun, the flow of compressed air, and the amount of charge given to the powder particles are controlled by the powder coating machine.

Sand Blasting Machine For Pre-Coating

The sand blasting machines manufactured by Inovatec machinery are some of the best quality machines in the market. The sand blasting machine can be used before the powder coating process. It helps to remove the contaminants from the part surface. It is essential to remove all the contaminants from the part surface. Only then the powder coating will be effective. Water is used in the sand blasting machine for the surface preparation of the water. The abrasives, along with water, are blasted on the surface of the workpiece for cleaning. The water helps to reduce the material removal from the workpieces. This process is completely safe for metal parts. It helps to improve the life of the coating.

Inovatec Machinery- Top Quality Batch Powder Coating Oven Manufactured in China
  • Uses best quality raw materials
  • High quality manufacturing processes
  • Support with replacement parts
  • All raw materials subjected to quality testing
Frequently Asked Question
What would be the typical shipping procedure for the batch powder curing oven?

The shipping will be either the standard shipping method or the express shipping method. Inovatec goes for the express shipping method if the order is a small one. But, the standard seas shipping method is adopted for bulk orders. So, we accept both these types of orders. We will pack the oven as per the international shipping standards.

Can you share the standard payment procedure supported for the batch powder curing oven from Inovatec machinery?

The customer needs to place an order request for the batch powder curing oven first. If any customization is required for the oven, then you need to mention that also while placing the order. Then, Inovatec will send the price quote for the oven. After receiving the quote, the customer can pay 30 percent of the order amount in advance. The production activities for the batch powder curing oven will be started by Inovatec after receiving this advance. The customer will have to pay the balance amount before the shipping of the batch curing oven.

What are the different payment options offered by the Inovatec machinery for the batch powder curing oven?

The payment mode preferred will vary for each customer. So, we have provided 5 types of payment options. They are PayPal, Western Union, Bank Transfer, and MoneyGram. You can choose any of these payment methods to make the payment. We will reject all payments done via credit card.

Will Inovatec ship the batch powder curing ovens to all locations?

The batch powder coating oven will be shipped to all the countries. Inovatec machinery has got distributors in all major countries. So, you can place the order for the batch powder coating oven either through our distributors or directly. So far, we have shipped the batch curing ovens to more than 80 countries. So, you can place your order with us.

Can you share the warranty terms for the batch powder coating oven from Inovatec machinery?

A one year warranty is provided for the batch powder curing oven from Inovatec machinery. If any of the components of the batch powder curing oven goes faulty during this one year period, then the customer will receive the replacement part for free. The shipping charges for the spare part will be paid by Inovatec machinery. If you need any spare parts after the warranty period, you can still get them from us. After the warranty period, the replacement parts are available for a basic cost. If you need to troubleshoot the oven at any time, you can contact us. We offer lifetime support for the batch curing oven.

FAQ Outline for Batch Powder Coating Oven-Frequently Asked Questions

Are you planning to implement batch processing for powder coating parts?
If yes, then you will be interested in the batch powder coating oven from Inovatec machinery.
Inovatec manufactures high-quality batch processing ovens.
The strict quality process taken by Inovatec ensures that all the batch powder coating ovens are of very high quality.
Inovatec provides complete powder coating solutions.
It comprises the powder coating oven, powder coating machine, powder spray gun, conveyor lines, and dedicated powder spray booth.
The benefits of using the batch powder coating oven from Inovatec are many.

 

1. What Does A Batch Powder Coating Oven Do?

The batch powder coating oven does the curing of the metal parts in batches.
So, if you have large quantities of parts for curing, then you can divide the parts into batches.
You can load one batch at a time into the oven for curing.
So, if you have different size parts, then you can arrange them in batches for curing.
Inovatec machinery produces multiple varieties of batch processing ovens.
So, you can easily get one that meets your requirement.
Various customizations are also possible in these batch processing ovens.
You will have to specify the required customizations while placing the order.
They are also known by other names like batch powder curing oven, batch processing oven, and batch curing oven.

 

2. What Are The Different Heating Methods Used By The Batch Powder Curing Oven?

There are many types of batch powder coating ovens from Inovatec machinery.
Each of these ovens uses different techniques for heating the oven.
The two commonly used heating techniques in a curing oven are given below.

2.1 Direct Heating Technique

Here, direct heating of the parts will take place.
Electric powder curing ovens make use of this technique for heating the oven.
Direct heating has the advantage of faster heating of the oven.
Thus, the bring-up time will be less for such ovens.
It will help you to reduce the oven cycle time.
Thus, more parts can be cured at the same time.

2.2 Indirect Heating Technique

Here, the heat is passed on to the metal parts for curing indirectly.
The gas powder curing oven is an excellent example of an oven that uses the indirect heating technique.
There will be a more uniform distribution of the heat in the case of this method.
The ramp-up time will be more for the indirect heating technique.
Proper airflow systems installed in the oven will ensure that the heat generated is uniformly distributed to all parts of the chamber.

 

3. Can You Share The Various Advantages of Using The Batch Powder Coating Oven From Inovatec Machinery?

The advantages of using the batch powder coating oven for the powder coating process are many.
These benefits are listed below.

3.1 Different customization options

Inovatec machinery provides multiple customization options for the batch powder coating oven.
The customization will help to fine-tune the oven according to your workflow.
Thus, you can make the process more efficient.
The level of customization will vary with oven models.

3.2 Power supply choice

The power specification will vary for different countries.
It will be either 110-volt power or 220-volt power.
Inovatec machinery provides both these power supply options for the customer.
The customer can select the appropriate power supply while placing the order.
Thus, the customer will not have to spend any additional amount on a power converter.

3.3 Technical support

If you have any technical issues with the batch powder coating oven, you can get in touch with us any time.
We will guide you to fix the issue.
This support is available for the entire lifetime of the ovens.

3.4 Processing time

There are different models of batch powder coating ovens from Inovatec machinery.
Some of these models are capable of processing the parts faster than others.
It is possible with the help of the various curing methods adopted by these ovens.
So, if you select such an oven, then you can reduce the overall cycle time for curing the parts.
It will help to increase the productivity of your curing process.

3.5 Replacement part

Inovatec machinery also offers replacement parts for the batch powder coating oven for its entire lifetime.
Free replacement is available if it is done within the warranty period.
You can buy the part for a standard price after the warranty period.

3.6 Easy to maintain

The batch powder coating oven from Inovatec is easy to maintain.
There are no complex maintenance instructions.
All the maintenance works are clearly mentioned in the manual.
It is easy to execute the maintenance work with the help of a standard toolkit.
No special training is needed for the maintenance of this oven.

3.7 Environment-friendly solution

The batch powder coating oven does not cause any pollution.
There are no toxic or harmful by=products coming out of the oven during its operation.
It is completely safe for the environment.

3.8 Cost-effective solution

The batch powder coating oven comes with a one-time cost.
The maintenance cost for the batch powder coating oven is very less.
The operational cost can still be reduced if you make use of a batch oven that utilizes a. less expensive fuel.
The oven guarantees a high-quality powder coat on the parts.
So, there won’t be any part rejection due to bad quality coating.
The oven also allows you to cure multiple parts at the same time.
So, it is a cost-effective solution.

3.9 Multiple powder size support

You can use the same oven to cure powders of different sizes.
It supports multiple powder sizes.
All types of coating powders can be used in this oven.

 

4. Can You Explain The Working Of A Standard Batch Powder Coating Oven?

The batch powder coating oven allows you to cure multiple parts at a time.
The workpieces need to be powder sprayed first using the powder coating machine.
After the powder spraying process, the sprayed parts are moved inside the batch powder curing oven.
The operator can enter the various curing parameters in the control panel of the oven.
The main curing parameters include the curing temperature and the curing time.
Once you start the process, then the system will start to heat the oven chamber.
Different ovens use different heating methods.
Some ovens will use the direct heating method, and the others will use the indirect heating method.
If it is a direct heating oven, then the bring-up of the oven will be fast, and the chamber will reach the curing temperature pretty fast.
Indirect heating ovens will take more time to reach the curing temperatures.
The oven will be fitted with an airflow system.
This system will ensure that the heat is distributed to all the parts of the chamber equally.
Once the curing time is over, you can take the parts out from the oven.
You need to rest the workpieces at room temperature for some time.
Once the parts cool down, you will get the final finished parts.
It is recommended to extend the curing time by few minutes to avoid any under curing issues.
But, make sure that the curing temperature is not increased for a faster process.
It may damage the parts.

 

5. Is There A Way To Prevent The Outgassing Phenomenon During The Curing Process In A Batch Powder Curing Oven?

The gas produced during the process of curing the workpieces may escape from the chamber.
This phenomenon is called outgassing.
It has an adverse effect on the powder coating.
It will result in the creation of tiny holes in the powder coat.
The presence of such tiny holes can lower the life of the powder coating.
Moisture present in the environment will get trapped in these holes and start affecting the coating.
So, it should be avoided.
If the workpiece surface had contaminants during the powder spraying process, then outgassing can occur.
So, you need to ensure that the part surface is clean before coating.
You can use any of the surface preparation techniques to clean the parts before the coating process.
The wet blasting process can be used for the surface treatment of parts.
You can make use of the sandblasting machine from Inovatec machinery for the wet blasting process.
You can also remove the contaminants effectively by preheating the parts.
The temperature for preheating must be higher than the curing temperature.
If the powder spray coat is very thick, then also the outgassing can occur.
So, if a thick coat is the design requirement, we recommend giving multiple thin coats, one on top of the other.
It will help to prevent outgassing.
Using a prime coat on the part surface before the powder coating procedure effectively prevents the outgassing.
The primer will ensure that there is a strong bond formed between the workpiece and the powder.
You must always use the best quality powder.
The low-quality powder will not have uniform flow characteristics.
So, there will be outgassing,

 

6. Gas Vs Electric Batch Powder Coating Oven – Which Is Best?

Gas and the electric batch powder coating oven are the two popular choices for the batch powder curing oven.
Both of these ovens have got their advantages as well as disadvantages.
You can use the following factors to decide which oven is going to be the best for your process.
The cost is the major factor.
You need to consider three types of costs here.
The machine cost, operational cost, and the maintenance cost.
Inovatec offers different types of batch powder curing ovens in different price ranges.
So, you can quickly get one within your price range.
The operational cost is mainly dependent on the fuel used by the oven.
Gas and electricity are the two popular fuel types.
Gas is less expensive when compared to electricity.
So, Gas ovens will have less operation cost than electric ovens.
When it comes to oven cycle time, electric ovens are faster than gas ovens.
It is because of the fact that the electric ovens use direct heating method whereas gas ovens use indirect heating method.
So, more parts can be cured at the same time.
The heat distribution is more uniform for the gas oven because of the indirect heating method.
If you deal with very large parts, then the gas ovens will prove to be more cost-effective.
You can arrive at a decision based on the above comparisons.

 

7. Can You Share The Various Factors That Affects The Life Of The Batch Powder Curing Oven?

There are many factors that affect the life of the batch powder curing oven.
These factors are listed below.

7.1 Load in the oven

The batch powder curing oven must not be used in an overloaded condition.
If you place more parts inside the oven, then the oven will come under heavy stress, and the life of the oven will come down drastically.
So, always operate the batch powder curing oven in 80 to 90 percent of its total load capacity.
It will help to increase the longevity of the oven.

7.2 Usage of the oven

Heavy use of the batch powder curing oven can also reduce its life.
If you have a large number of parts, then don’t run the oven continuously for a long time.
Give some breathing space for the oven in between.
It will help to reduce the stress on the oven.

7.3 Maintenance of the oven

Proper maintenance of the batch powder curing oven is essential.
Never skip any of the maintenance activities of the oven.
It will affect the lifespan of the batch powder curing oven.

7.4 Timely replacement of parts

The various parts of the batch powder curing oven can go bad over time.
But, you can get the replacement parts from Inovatec machinery.
So, makes sure that you do the replacement at the right time.
If you use the machine with weak parts, then the other healthy parts of the oven will start failing soon.

7.5 Stable power source

There should not be any fluctuations in the power you are feeding to the batch powder curing oven.
An unstable power can put heavy stress on the electronics of the oven.
So, check and ensure that the power is free from fluctuations.

7.6 Regular cleaning of the oven.

The batch powder curing oven must be cleaned regularly.
Contaminants present in the oven parts can affect its life.
So, you need to ensure that there are no contaminants present in the oven at any point in time.

 

8. Is It Possible To Customize The Batch Powder Coating Oven?

The customization is possible for the batch powder curing ovens of Inovatec machinery.
The customer has the option to give the customization request for the batch processing oven while placing the order.
The level of customization possible in a batch processing oven will vary with the models.

 

 

9. What Is The Typical Lifespan For The Batch Powder Curing Oven?

The batch powder curing oven comes with a very long lifespan.
It is because engineers from Inovatec machinery have used high-end materials for the production of the batch powder curing oven.
The lifespan of the batch powder curing oven is mainly dependent on its maintenance.
So, proper maintenance will ensure a very long life.
It will also depend on the usage.
So, use the oven properly.

 

10. What Is The Part Size Supported By The Batch Powder Coating Oven?

Inovatec machinery manufactures multiple types of batch powder curing ovens.
Some of these ovens are designed for large size parts and others for small size parts.
So, all part sizes are supported by the batch powder curing oven from Inovatec machinery.

 

11. What Would Be The Maximum Possible Curing Time That Does Not Cause Any Damages To The Powder?

The typical curing time for a part will be around 20 to 30 minutes.
It is actually the powder manufacturer who decides the curing time.
The curing time will be different for different powders.
So, check with the manufacturer to know the right curing tome for the powder that you are using.
The size of the part will also influence the curing time.
Large parts will take more time to cure than small parts.
It is recommended to extend the curing time by few more minutes to avoid any kind of under-curing.

 

12. Can You Share The Different Applications Of The Batch Powder Coating Oven?

The batch powder coating oven comes with different applications.
These applications are given below.

12.1 Curing of Metallic Furniture Parts

The lifespan of the metal furniture parts can be increased with the help of the curing process.

12.2 Curing of Electronic parts

The insulating and conductive coating can be provided to the electronic parts with the help of the batch powder coating oven from Inovatec machinery.

12.3 Curing of Medical Parts

Medical parts that demand powder coating can make use of the batch powder coating oven from Inovatec machinery.

12.4 Curing of Die-cast parts

The life of the die-cast parts can be enhanced with the help of curing by batch powder coating ovens.

12.5 Curing of Mechanical Parts

Large quantities of mechanical parts can be easily cured using batch powder coating ovens.

12.6 Curing of Metallic Cookware Parts

Metallic cookware parts, both large and small, can use powder coating solutions from Inovatec machinery.

12.7 Curing of Automotive Parts

The batch powder coating ovens are mostly used in the curing of a large number of different types of automotive parts.

12.8 Curing of Defense parts

Large and small defense parts need to be cured after the powder spraying process.

12.9 Curing of Architecture parts

The looks and aesthetics of the architecture parts can be greatly improved through the curing process.

13. How To Select The Best Batch Powder Coating Oven?

It is essential to ensure that the batch powder curing oven that you select is the best one for your business.
There are many types of batch powder curing ovens of Inovatec machinery.
We will share some tips that will help you to select the right batch powder curing oven.
First, you need to ensure that the chosen model matches your part size.
If you deal with multiple part sizes, then the selection of the oven needs to be done in such a way that it is capable of curing the largest part size.
So, the same oven can be utilized for curing smaller part sizes.
The type of fuel used in the oven is another factor.
The different fuels used include LPG, gas, diesel, and electricity.
You must select a fuel type that costs less for you.
Only then you will be able to run a profitable powder coating process.
If you are interested in accelerating the curing process, then you must look for ovens with fast cycle times.
Cost is another important factor.
You must consider the operational cost, machine cost, and maintenance cost of the oven.
The multiple models offered by Inovatec machinery will definitely help any business choose the right type of oven for their needs.
Inovatec also offers various customizations on the batch powder curing oven.
It is good to invest in a batch powder curing oven that comes with digital controls.
It will ensure that you can input precise values for the different curing parameters.

 

14. Can You Share The Costing Details For The Batch Powder Coating Oven?

powder coated cup gun

Inovatec machinery manufactures different varieties of batch powder curing ovens.
So, the cost will be different for each of these ovens.
The costing will also vary when you make various customization in the machine.
You can get in touch with us to know the pricing details for the various batch powder curing ovens.
You can get batch powder curing ovens in all price ranges from Inovatec machinery.

 

15. Can You Share The Standard Cleaning Cycle For The Batch Powder Coating Oven?

The batch powder curing oven must be cleaned at regular intervals.
When you have completed the curing of the entire batch of workpieces, then you can clean the batch processing oven.
You can also clean the batch processing oven after completing the day’s curing job.
During the maintenance time, you need to do a thorough cleaning of the batch processing oven.
The cleaning process is essential to ensure that the powder curing process does not get contaminated by dust in the oven.

 

16. What Is The Maximum Service Temperature Of The Powder Coated Part?

The maximum service temperature for the powder-coated workpieces is 350 degrees Fahrenheit.
So, you cannot employ powder-coated parts in places where the temperature exceeds 350 degrees Fahrenheit.
The powder coating will get damaged when the part is exposed to such high temperatures.

 

17. What Are The Steps Taken By Inovatec Machinery That Ensure The Quality Of The Batch Powder Coating Oven?

Inovatec machinery always offers high-quality batch processing ovens.
It is ensured with the help of many steps.
We use high-quality materials for the manufacturing of batch processing ovens.
These raw materials are sourced from reputed vendors.
Inovatec maintains a list of vendors for sourcing the raw materials.
All our engineers are certified and well experienced.
We follow a strict quality process in the manufacturing of batch processing ovens.
All the materials that are used for the production of the batch processing oven are subjected to specific quality tests.
Only those parts that pass the tests will be moved for production.
All the batch powder coating ovens will be tested for full functionality after production.
The customer can also come to our facility to test the oven before shipping.
Inovatec will pack the batch processing oven according to international shipping standards.
It will ensure that the machine is safe and secure during shipping.

 

18. Continuous Vs Batch Processing Oven- Which is Good?

Both the continuous and the batch processing ovens from Inovatec machinery are equally good.
Inovatec machinery offers many models in both these types of curing ovens.
Among these two, which one is good for you will depend on many factors.
These factors are given below.
If you are not interested in the human involvement of parts in and out of the oven, then the continuous oven will be a good choice.
Here, the part movement happens via the conveyor system.
It will help to reduce the number of human laborers.
When it comes to space, batch processing oven occupies less space when compared to the continuous processing ovens.
The batch processing oven is capable of handling multiple part sizes in the same oven.
The continuous oven is more suited for similar part sizes.
So, if your business deal with parts of different sizes, then the batch processing oven will be a good option.
The continuous processing ovens make use of air curtains
It will not have doors.
So, there will be more loss of heat in these ovens.
The batch process will allow you to load parts in batches.

 

19. Can You List The Typical Maintenance Activities On The Batch Powder Curing Oven?

Maintenance is essential for the batch processing oven.
It will help to ensure that the machine stays healthy for a long time.
All the maintenance work on the batch processing oven can be easily carried out using the standard toolkit.
You don’t have to spend on the additional toolkit to do the maintenance work.
All the maintenance work on the batch processing oven can be done easily with the help of the simple instruction set given in the manual.
The maintenance work will vary for different models of the batch processing ovens.
But, some of these works are common.
They are listed below.

19.1 Visual inspection of the oven

Visual inspection is the most critical work in the maintenance job.
It will help to find out the state of health of the batch processing oven.
Most of the issues with the batch powder coating oven can easily find out in the visual inspection.

19.2 Part replacement

The various components of the batch powder coating oven can go bad over time.
So, you need to replace these parts when they go weak.
The replacement can be done during the maintenance time.
You can get all the spare parts for the batch powder coating oven from Inovatec machinery.

19.3 Greasing and Cleaning

The greasing needs to be done on the hinges and all other applicable parts.
A thorough cleaning needs to be done on the batch powder coating oven to ensure that the machine runs smoothly.
A thorough cleaning needs to be done on the batch powder coating oven to ensure that the machine runs smoothly.
You can make use of the chemicals mentioned in the manual for cleaning the oven.

 

20. How To Check If The Powder Coating Is Cured Or Not?

Once you are done with the powder curing process, you need to ensure that the parts are cured properly.
You need to give some time for the parts to cool down first after taking them from the oven.
There are many tests for checking the curing on the parts.
You can use any of these methods.
The gloss meter test is a popular one.
Here, the gloss reading on the parts is checked using the gloss meter.
It is cross-checked with a sample reading.
MEK test can also be performed on the part.
MEK stands for the reagent Methyl Ethyl Ketone.
When applied to the part, this reagent will change the color if the part is not cured correctly.
The simplest test you can do is the part color test.
You need to cross-check the part color with the sample workpiece.

 

21. What Is The Difference Between Dwell Time & Oven Cycle Time?

When it comes to the curing process, there are three types of times.
They are the oven cycle time, bring-up time, and dwell time.
The time taken by the batch powder coating oven to reach the curing temperature is called the bring-up time of the oven.
The time for which the workpieces stay at the curing temperature is called the dwell time.
The oven cycle time is the total time it takes to complete one cycle of the curing process.
It is obtained by adding the dwell time with the bring-up time of the oven.

 

22. What Are The Possible Reasons For Cracks In The Powder Coat After The Curing Process?

powder coating cup gun

Cracks on the powder coat are undesirable in any business.
So, you must try to avoid the cracks.
It will affect the yield of the powder coating process.
There are many reasons for the cracks appearing in the powder coat.
All these reasons are mentioned below.
If the curing temperature inside the batch powder coating oven is unstable, then it will result in cracks in the coat.
So, you must invest in high-quality batch powder coating ovens to avoid this issue.
Inovatec machinery manufactures professional high-quality batch powder coating ovens.
If the temperature set for curing is less, then also this issue will happen.
Here, it is due to the improper flow of powder across the part surface due to lack of temperature.
If the curing time is less, then crack swill occurs.
The misconception that the oven cycle time and the dwell time are the same can cause this lower curing time.
It is mainly due to the misinterpretation of the times by the operator.
If you use a low-quality powder that does not have a uniform flow, then cracks can occur in the powder coat.

 

23. What Is The Curing Time For The Parts Using The Batch Powder Coating Oven?

The typical range of curing time will vary between 20 to 30 minutes.
The curing time is actually dependent on the coating powder.
So, you need to check with the powder manufacturer to know the exact curing time for the part.
When you deal with large and heavy parts, then it will take more time to cure.

 

24. Can You Share The Temperature Range For The Batch Powder Curing Oven?

powder coating machine

The batch powder coating ovens from Inovatec machinery support a broad range of temperatures.
325 degrees Fahrenheit is the lowest possible curing temperature in the batch processing ovens from Inovatec.
The curing temperature can go as high as 450 degrees Fahrenheit.
Almost all coting powders will have a curing temperature in this range.
So, our batch powder coating ovens can be used to cure most of the powders.

 

25. Are There Any Safety Issues With The Batch Powder Coating Oven From Inovatec Machinery?

The batch powder coating ovens from Inovatec machinery will not harm the operator.
It will neither harm the powder curing process also.
The user needs to ensure that he uses the oven according to the instructions given in the user manual.
The operator must not neglect the instructions set given in the manual.

 

26. Will The Batch Powder Coating Oven Temperature Affect My Parts?

KL-1732 Electric Powder Coating Batch Oven

The batch powder coating oven is used to cure metal parts.
Almost all metal parts are capable of handling the curing temperature specified by the powder manufacturer.
So, it will not cause any harm to the metal parts.
But, it is good to check the temperature compatibility of the metal part before starting the powder coating process to ensure that the part does not get damaged due to these temperatures.

 

27. How To Avoid The Orange Peel Effect During The Curing Process?

powder coating process

The orange peel effect is an unwanted phenomenon,
So, you must avoid it during the powder curing process.
You can avoid the orange peel in many different ways.
The slow bring-up rate of the oven is one of the main causes of the orange peel effect.
So, preheating the batch powder coating oven is one of the best solutions to avoid this problem.
Otherwise, you can also invest in an oven with a fast bring-up time.
The orange peel is also visible when the powder spray coat on the workpiece is very thick.
You need to ensure that the spray coat is not thick with the help of the right powder spray settings in the powder coating machine.

 

28. Is There Any Training Needed For The Operators To Use The Batch Powder Coating Oven?

The operator does not need any training from us to use the batch powder coating oven.
All the instructions needed to operate the batch processing oven are given in detail in the user manual.
All these instructions are easy to follow instructions.
There are no complex instructions.

 

29. How Does A Batch Powder Coating Oven Help To Improve The Efficiency Of The Powder Coating Process?

In any industry, you need to ensure that the powder curing process you are using must be run efficiently.
Only then the business will be profitable.
The batch processing ovens from Inovatec machinery really help to improve the overall efficiency of the powder coating process in many ways.
These ways are given below.

29.1 No part damages

There will be no part damage happening due to the use of batch processing oven from Inovatec.
The temperature in the oven will not go beyond the set values.
Thus, the metal workpieces will never experience any extreme temperature conditions.
So, they are safe.

29.2 Fast ramp-up time

There are multiple types of batch processing ovens from Inovatec machinery.
The ovens that use the direct heating technique will come with faster ramp-up times.
So, you can use such ovens to lower the total cycle time for the oven.
In addition, it will help to cure more workpieces at the same time.

29.3 Uniform heat distribution inside the oven

All the batch processing ovens from Inovatec machinery come with an airflow system inside.
This airflow system helps to distribute the heat evenly to all parts of the chamber.
Thus, all the parts inside the oven get the same amount of heat.
So, the coating will be uniform across all the parts.

29.4 Consistent curing temperatures

The ovens from Inovatec provide consistent curing temperature.
There won’t be any fluctuations in the temperature values inside the oven.
The digital controls allow the user to set precise curing temperatures.

29.5 High-quality finish on parts

The batch powder coating ovens from Inovatec guarantee a high-quality finish if you use it, along with good quality coating powders.
Any finish or texture can be given to the parts with the help of the batch powder coating ovens.
The high-quality coated parts help to improve your business.

29.6 Customization

Inovatec machinery allows different customizations on the batch powder coating ovens.
These customizations will enable you to make your process lot efficient.

 

30. Can You Share The Type Of After Sales Support Given From Inovatec Machinery For The Batch Powder Coating Oven?

Inovatec machinery ensures that all our customers get good support after sales too.
We offer lifetime support for all batch powder coating ovens.
So, if you have any technical glitch with the oven, you can contact us.
We will help you to fix the issue.
Inovatec offers one year warranty for all the batch powder coating ovens.
This one-year warranty covers the free replacement of oven parts if any of them goes bad.
The shipping charges for the replacement part will be paid by Inovatec.
If you need a replacement part after the warranty time, you can still get it from us.
We offer the spare parts for a nominal cost after the warranty period.

 

31. Is It Possible To Remove The Powder From Cured Workpieces?

The coating can be removed from the cured parts.
In some instances, you may want to remove the coating if you are not happy with the coating.
Special reagents need to be used to remove the coating.
While selecting the reagents, you must ensure that the reagent is compatible with the metal part.
Otherwise, it will damage the metal parts.
You must not use a hard-wired brush to remove the coating from the cured workpieces.

 

32. Does Particle Size Affect The Coating Process Using The Batch Processing Ovens?

The size of the powder affects the coating process.
Many properties of the curing process are affected by the particle size.
It includes deposition and build rate, powder transport in hoses, fluidization, powder movement in the air, electrostatic charging, smoothness of the coating, faraday cage penetration, and transfer efficiency.
The flow rate will vary with the powder size.
The final appearance of the part will be affected by the size of the powder.

 

Conclusion

The batch powder coating oven from Inovatec machinery comes with many advantages.
Inovatec produces a variety of batch processing ovens.
So, you can easily select an oven based on your requirements.
Inovatec machinery offers complete powder coating solutions.
It includes a powder coating machine, powder spray gun, conveyor system, powder coating oven, and powder spray booth.
So, you can contact us any time for a complete solution or individual machines.

Send Your Inquiry Today
Scroll to Top